Specifications

Zaxcom TRX-900LT Series Manual Extended Menu
11
IFB Receive to Transmit time
This menu sets how long after power up that the transmitter will search for ZaxNet timecode before it
begins transmitting IFB audio for monitoring purposes.
ZaxNet IFB Receive Frequency
This is where you set the ZaxNet receive frequency.
• This frequency is the frequency that the transmitter will receive wireless ZaxNet TC and commands as
long as this frequency matches the frequency of the corresponding ZaxNet transmitter - which can be a
Nomad or IFB100/200.
• This frequency is the frequency that the transmitter will receive TC from another TRX transmitter or a
ZFR recorder as long as this frequency matches the frequency of the corresponding transmitter.
The TRX will receive ZaxNet only
and NOT transmit ZaxNet TC and audio.
Adjustable from 1 up to 20 Seconds.
After boot up the TRX will search for a
ZaxNet signal for XX seconds before it
begins to transmit ZaxNet TC and Audio
IMPORTANT: After changing this setting a re-boot is required
IFB RX TO TX:
NORMAL RX
IFB RX TO TX:
20 SECS
IFB RX TO TX:
0 SECS: TX ONLY
The TRX will transmit ZaxNet TC and
audio only and will NOT receive
wireless TC.
When the TRX is receiving a ZaxNet signal you will also see:
ZaxNet signal frequency and RX shows that it is being
received
Signal strength meter
l h
RXFREQ: 2.403
RX
SIGNAL: 28
RXFREQ: 2.403