TDS

ManualsBrandsZAR ManualsInterior Wood Stains1 qt. Semi-Transparent 120 Premium Teak Oil-Based Multi-Surface Interior Wood Stain

ZAR® Interior Oil Base Stain

ZAR® Interior Oil Base Stain is a highly

pigmented oil base stain uniquely

formulated to achieve a rich, luxurious color

in one coat. Its thick viscosity allows for easy

application resulting in a rich uniform color.

Use on wood, berglass, metal, painted, and

pre-nished surfaces. Ideal for hard to stain

woods like pine, birch, alder, and maple. Can

be used as a glaze on cabinets, moldings,

and oors to achieve a two-tone layered

eﬀect..

Stains evenly with controlled penetration

Wipes on like furniture polish

Produces a rich uniform color

Leaves no lap marks or streaks

Multi-surface formula

Tintable

ZAR® Interior Oil Base Stain can be applied

to all varieties of wood, both unnished and

previously nished, and can be used on

surfaces that have been previously painted

or varnished to achieve a wood grain eﬀect.

ZAR® Interior Oil Base Stain brings out the

beauty of wood on interior surfaces such as

cabinets, oors, paneling, antiques, doors,

wood trim and unnished furniture.

Steel Doors or Painted Surfaces: In

addition to wood doors, ZAR® Interior Oil

Base Stain when used with the ZAR®

Graining Tool is excellent for making steel

doors look like real wood.

Grained Embossed Surfaces (Fiberglass,

Steel or Composite):

Because berglass doors have a wood grain

embossed in their surface, ZAR® Interior Oil

Base Stain can be used to quickly and easily

bring to life the door’s real wood look.

Stains and clear nishes will not adhere to

shellac or lacquer. ey should be removed

before renishing.

COMPOSITION:

Oil Base

% WEIGHT SOLIDS:

47.7-60.6 (Depending on color)

DENSITY (LBS./US GAL.)

7.61-8.77 (Depending on color)

(S.G. 0.91-1.05)

VISCOSITY:

30 sec ± 5 sec Ford #4 cup e 25ºC

COLORS:

• 18 Wood tones

• 2 Tint Bases

DRY TIME:

3 hours

Note: Maximum cure and dry time will

be prolonged when slightly humid and

damp, cool conditions prevail.

CLEAN UP:

Paint thinner or mineral spirits

Dispose of contaminated absorbent,

container, and unused contents in

accordance with local, state, and federal

regulations.

COVERAGE (SQ. FT./GAL.):

3200 sq. . (296 m

)/gal. @ 1 mil

Note: Actual coverage will vary

depending upon application method,

surface texture, and porosity.

FLASH POINT:

104ºF (40ºC)

SHELF LIFE:

5 Years unopened container

CONTAINER SIZES:

One-half pint (US), one quart (US) and

one gallon (US) cans

Does not exceed 500 g/L. ZAR® Interior Oil

Base Stain Color Matcher Tint Bases

(Colorant VOC not included).

Personalize and create a unique color by

intermixing any ZAR® Interior Oil Base Stain

colors together for unlimited color

possibilities. Check out our intermixing

formula color guide using a 1:1 ratio formula.

Use ZAR® Interior Oil Base Stain Color

Matcher Tint Base by adding tinting

colorants only. Maximum 3 uid ounces per

quart, Maximum 12 uid ounces per gallon.

Substrates should be clean and free from dirt,

wax, and grease.

1. Fill holes and cracks with ZAR® Wood Patch.

2. Sand smooth with 120-150 grit sandpaper.

3. Remove sanding dust and wipe clean with a

tack cloth or cloth dampened with paint

thinner or mineral spirits. Allow to dry.

If you scrape, sand, or remove old paint, you

may release lead dust. LEAD IS TOXIC.

EXPOSURE TO LEAD DUST CAN CAUSE

SERIOUS ILLNESS, SUCH AS BRAIN

DAMAGE, ESPECIALLY IN CHILDREN.

PREGNANT WOMEN SHOULD ALSO

AVOID EXPOSURE. Wear a NIOSH-

approved respirator to control lead exposure.

Clean up carefully with a HEPA vacuum and a

wet mop. Before you start, nd out how to

protect yourself and your family by

contacting the National Lead Information

Hotline at 1-800-424-LEAD or log on to

www.epa.gov/lead.

APPLICATION ON BARE WOOD: Stir

thoroughly before and during application.

Using a lint-free cloth (like a t-shirt) or brush

apply ZAR® Interior Oil Base Stain evenly in

the direction of the grain and wipe oﬀ excess

in the same direction. For a darker tone, re-

UNITED GILSONITE LABORATORIES

MAILING: P.O. Box 70, Scranton, Pennsylvania, 18501

SHIPPING: 1396 Jeﬀerson Avenue, Dunmore, Pennsylvania, 18509

OLL FREE: 1-800-UGL-LABS (845-5227)

HONE: 1-570-344-1202 • FAX: 1-570-969-7634

www.UGL.com

Z A R ® W O O D F I N I S H I N G P R O D U C T S

O V E R

Paint

Thinner

DRY TIME:

3 Hours

CLEAN-UP:

Paint inner or

Mineral Spirits

Cheese

Cloth

COVERAGE:

1 Coat

SPREAD RATE:

3200 Sq.

Ft./Gallon

Summary of content (2 pages)

PAGE 1
Z A R® WO O D F I N I S H I N G P RO D U C TS ZAR® Interior Oil Base Stain UNITED GILSONITE LABORATORIES MAILING: P.O. Box 70, Scranton, Pennsylvania, 18501 SHIPPING: 1396 Jeﬀerson Avenue, Dunmore, Pennsylvania, 18509 TOLL FREE: 1-800-UGL-LABS (845-5227) PHONE: 1-570-344-1202 • FAX: 1-570-969-7634 www.UGL.com ZAR® Interior Oil Base Stain is a highly pigmented oil base stain uniquely formulated to achieve a rich, luxurious color in one coat.
PAGE 2
stain when the first coat is dry. For a lighter tone, wipe the surface with a cloth dampened with mineral spirits or paint thinner before the stain has dried. APPLICATION ON PAINTED AND PREFINISHED CABINETS: DO NOT SAND PAINTED SURFACE. Surfaces must be clean and free from dirt, wax, and grease. Painted surfaces must be thoroughly dry. Apply ZAR® Interior Oil Base Stain with a clean, lint-free cloth (like a t-shirt) or brush. Apply to desired areas to achieve a glazed two-tone eﬀect.