User Manual GETTING STARTED? EASY.
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
• • • • • • The appliance must be connected to the water mains using the new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre. Old hose sets must not be reused. If the mains power supply cable is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons to avoid an electrical hazard. Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.
SERVICE • To repair the appliance contact an Authorised Service Centre. • Use original spare parts only. USE WARNING! Risk of injury, electrical shock, fire, burns or damage to the appliance. • • • • • • DISPOSAL This appliance is for household use only. Follow the safety instructions on the detergent packaging. Do not put flammable products or items that are wet with flammable products in, near or on the appliance. Make sure that all metal objects are removed from the laundry.
CONTROL PANEL CONTROL PANEL DESCRIPTION 1 20 19 2 1 2 18 17 900 4 16 5 15 6 7 13 4 Delay Start 1200 3 14 3 Eco 700 500 Rinse Hold Spin Door Quick Wash Option Prewash Easy Iron Extra Rinse Start/Pause 8 7 6 5 8 12 11 10 9 10 1 Programme knob 2 Display 3 Delay Start button (Delay Start) 9 8 Prewash button (Prewash) 9 Options button (Option) 4 Door locked indicator 5 Start/Pause button (Start/Pause) • ECO (Eco) • Quick (Quick Wash) 10 Spin reduction steps (Spin) 6 Ext
PROGRAMMES PROGRAMME CHART Programme Temperature range Maximum load Maximum spin speed Programme description (Type of load and soil level) Cottons 1 Cottons 90°C 7 kg 1200 rpm White cotton and coloured cotton. Normal soil and light soil. 2-3 Cottons 7 kg 1200 rpm White cotton and colour-fast cotton. Normal soil. The energy consumption decreases and the time of the washing programme is extended. Cottons 30°C 7 kg 1200 rpm White cotton and coloured cotton. Normal soil and light soil.
Programme Temperature range Maximum load Maximum spin speed Programme description (Type of load and soil level) Specials 14 Jeans 40°C 3 kg 1200 rpm Items in denim and jersey. Also for dark coloured items. 15 Mix 20° 20°C 3 kg 900 rpm Special programme for cotton, synthetic and mixed fabrics lightly soiled. Select this programme to reduce the energy consumption. Make sure that the detergent is suitable for low temperature in order to have good washing results.
Programme Temperature range Maximum load Maximum spin speed Programme description (Type of load and soil level) For cancelling the programme which is running or switch the appliance off. 1) Standard programmes for the Energy Label consumption values. According to regulation 1061/2010, the "Cotton " with "Eco option and the "Cotton " with "Eco option are respectively the «Standard 60°C cotton programme» and the «Standard 40°C cotton programme».
Programme 1) 2) 3) 4) ■ 1) This option is not active at a temperature lower than 40°C. 2) If you select this option we recommend that you reduce the maximum load. full loading is possible, however with somewhat reduced cleaning results. 3) If using liquid detergent, a programme without prewash must be selected. 4) if you set the Easy Iron, the recommended max load is 1.5 kg. CONSUMPTION VALUES The data in this table are approximate.
Off Mode (W) 0.10 Left On Mode (W) 0.98 The information given in the chart above is compliant with the EU Commission regulation 1015/2010 implementing directive 2009/125/EC. OPTIONS PROGRAMMES SELECTION This knob allows you to select a programme and/or to switch the appliance on/off . SPIN With this option you can change the default spin speed. The indicator of the set speed comes on. RINSE HOLD • Set this option to prevent the laundry creases. • The related indicator comes on.
SETTINGS CHILD LOCK With this option you can prevent that the children play with the control panel. • To activate/deactivate this option, press Spin and Option at the same time until the indicator comes on/goes off. You can activate this option: • After you press Start/Pause: the options and the programme knob are locked. • Before you press Start/Pause: the appliance cannot start. ACOUSTIC SIGNALS The acoustic signals operate when: • The programme is completed. • The appliance has a malfunction.
• The display shows the programme duration. 2. If necessary, change the temperature and the spin speed or add available options. When you activate an option, the indicator of the set option comes on. 2. Turn the programme knob again to activate the appliance. Now, you can set a new washing programme. Before starting the new programme the appliance could drain the water. In this case, make sure that the detergent is still in the detergent compartment, if not fill the detergent again.
The washing programme is completed, but there is water in the drum: • The drum turns regularly to prevent the creases in the laundry. • The indicator Rinse Hold stays on to remind you to drain the water. • The door lock indicator is on. The indicator of button Start/Pause flashes. The door stays locked. • You must drain the water to open the door. Draining the water: 1. To drain the water. • Set a Drain or a Spin programme. • Press the button Start/Pause. The appliance drains the water and spins. 2.
• To use the correct quantity of detergent, check the water hardness of your domestic system. Refer to "Water hardness". WATER HARDNESS If the water hardness in your area is high or moderate, we recommend that you use a water softener for washing machines. In areas where the water hardness is soft it is not necessary to use a water softener. To know the water hardness in your area, contact your local water authority. Use the correct quantity of the water softener.
• CAUTION! Switch the appliance off and remove the mains plug from the socket. Proceed as follows: • Unplug the appliance. • If it is necessary, wait until the water has cooled down. • Place a container A B close to the pump (A) to collect any spillage. • Pull out the emergency emptying hose (B), place it in the container and remove its cap. • • • • 1 • 2 • • • When no more water comes out, unscrew the filter. Turn the filter anticlockwise. Remove the filter. Use pliers, if necessary.
• • • Clean the filter in the valve with a stiff brush or with the piece of cloth. Screw the hose back to the machine and make sure the connection is tight. Turn on the water tap. 45° 20° FROST PRECAUTIONS If the appliance is installed in an area where the temperature can be less than 0° C, remove the remaining water from the inlet hose and the drain pump. 1. Disconnect the mains plug from the mains socket. 2. Close the water tap. 3.
POSSIBLE FAILURES Problem Possible solution The programme does not start. • • • • • Make sure that the mains plug is connected to the mains socket. Make sure that the appliance door is closed. Make sure that there is not a damaged fuse in the fuse box. Make sure that the Start/Pause has been pressed. Deactivate the Child Lock function if it is on (if available). The appliance does not fill with water properly. • • Make sure that the water tap is open.
Problem Possible solution The washing results are not satisfactory. You cannot set an option. • • • • Increase the detergent quantity or use a different detergent. Use special products to remove the stubborn stains before you wash the laundry. Make sure that you set the correct temperature. Decrease the laundry load. • Make sure that you press only the wanted button(s). After the check, activate the appliance. The programme continues from the point of interruption.
• POSITIONNING • Install the machine on a flat hard floor. Make sure that air circulation around the appliance is not impeded by carpets, rugs etc. • Check that the machine does not touch the wall or other kitchen units. • Level the appliance by raising or lowering the feet. • The feet may be tight to adjust as they incorporate a self locking nut, but the appliance MUST be level and stable.
could be done by tying it to the tap with a piece of string or attaching it to the wall. • In a sink drain pipe branch. This branch must be above the trap so that the bend is at least 60 cm above the ground. • Directly into a drain pipe at a height of not less than 60 cm and not more than 90 cm. The end of the drain hose must always be ventilated, i.e. the inside diameter of the drainpipe must be larger than the outside diameter of the drain hose. The drain hose must not be kinked.
16-22 mm X Ø 35 mm 416 mm A 22±1,5 mm 14 mm 595-598 mm Hinges To mount the hinges drill two holes (dia. 35 mm, depth 12.5-14 mm depending on the depth of door furniture) on the inner side of the door. To fix the hinges to the door use the screws for wood 1 and 2 supplied with the appliance (see below). B To align the door perfectly, loosen the screw, adjust the door and tighten the screw A again. The appliance is prearranged for a magnetic closure of the door.
D A C E B TECHNICAL DATA Dimension Width/ Height/ Depth/ Total depth 596 mm/ 820 mm/ 544 mm/ 560 mm Electrical connection Voltage Overall power Fuse Frequency 230-240 V 2050 13 A 50 Hz Level of protection against ingress of solid particles and moisture ensured by the protective cover, except where the low voltage equipment has no protection against moisture IPX4 Water supply pressure 0,5 bar (0,05 MPa) 8 bar (0,8 MPa) Minimum Maximum Cold water Water supply 1) Maximum Load Cotton 7 kg Energ
132939800-A-422015 WWW.ZANUSSI.
