EN User manual Wine refrigerator ZRW110N
The following symbols are used in this manual: Important information concerning your personal safety and information on how to avoid damaging the appliance.
Contents Safety information_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Operation_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Maintenance _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Technical information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 5 5 6 7 Customer service and spare parts _ _ _ _ _ _ _ _ _ Electrical connection _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Installation _ _ _ _ _ _
Use Installation • The domestic wine refrigerator is designed to be used specifically for the storage of potable wine only. Important: For electrical connection carefully follow the instructions given in specific paragraphs. • Best performance is obtained with ambient temperature as follows: Climate class Ambient temperature SN +10°C to +32°C N +16°C to +32°C ST +16°C to +38°C T +16°C to +43°C T he class of your appliance is shown on its rating plate.
Use Cleaning the interior Do not use detergents or abrasive powders, as these will damage the finish. Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand-new product, and then dry naturally and thoroughly.
Lay the bottles down in such a way that the corks do not dry. Avoid switching the appliance light on too often or for too long. Wine keeps better in dark. Handle the bottles with care, to avoid agitating the wine. Follow the recommendations and advice received at the time of purchase or given in the technical documentation regarding the quality, duration and optimum storage temperature of the wine. 1. The interior light will be on automatically for 5 minutes when the wine refrigerator is powered on. 2.
Cleaning Cleaning the inside, removing the shelves, with lukewarm water and a mild detergent. Periodically clean the defrost water drain hole, using a special “cleaner”. Periodically clean motor compressor with a brush or vacuum cleaner. This operation will improve operation, with consequent energy saving. During periods when the appliance is not being used, take the following precautions: – unplug the appliance; Important Never use metal objects to clean the appliance.
Electrical connection Before plugging in, ensure that the voltage and frequency shown on the serial number plate correspond to your domestic power supply. Voltage can vary by ±6% of the rated voltage. For operation with different voltages, a suitably sized auto-transformer must be used.
Installation 3. Remove the two screw covers. Important In order to reserve the required space around the refrigerator for ventilation, please keep 100mm distance between 2 sides and top of the wine refrigerator and the wall and 50mm distance between rear of refrigerator and the wall. 100 50 4. Remove the two screws and take the handle off. Put the handle at a safe place. 100 Door reversibility Before carrying out any operations, remove the plug from the power socket.
6. Unscrew the hinge screws and remove the hinge, then lift the door and put it on a padded surface to avoid scratch. Put the hinge and the screws in a safe place. 7. Remove the cover of door as the rotation direction shown in the below picture. And then put it on the other side of the door. 9. Fix the handle on the left side, insert the plastic cover that can be found in bag for use instruction. 10. Lay the appliance on a soft rug or similar article to protect it.
13. Fix the lower hinge with screws on the other. 16. Fixed the top cover by the two screws. Levelling 14. Put the door on the lower hinge. Keep the door cling the cabinet and put the upper hinge into the hinge hole. The right and left side of the door must align with the sides of the cabinet. And then securely fix the upper hinge. The appliance should be level in order to eliminate vibration. There are 4 height adjustable feet at bottom of the appliance, 2 feet in the front and 2 feet in the back.
What to do if... Warning: Before troubleshooting, disconnect the power supply. Only a qualified electrician of competent person must do the troubleshooting that is not in this manual. Malfunction The wine is too warm. Important: There are some sounds during normal use (compressor, refrigerant circulation). Possible cause Remedy Temperature is not properly adjusted. Please look in the “Use” section. Door was open for an extended period. Open the door only as long as necessary.
