User manual

Close the oven

door to the first open-

ing position (halfway).

Then pull forward and

remove the door from

its seat.

Put the door on a

soft cloth on a stable

surface.

Release the lock-

ing system to remove

the internal glass

panel.

90°

Turn the two fas-

teners by 90° and re-

move them from their

seats.

Carefully lift (step

1) and remove (step

2) the glass panel.

Clean the glass panel with water and soap. Dry

the glass panel carefully.

Installing the door and the glass panel

When the cleaning is completed, install the

glass panel and the oven door. Do the above

steps in the opposite sequence.

The screen-printing zone must face the inner

side of the door. Make sure that after the instal-

lation the surface of the glass panel frame on

the screen-printing zones is not rough when

you touch it.

Make sure that you install the internal glass

panel in the seats correctly. Refer to the illustra-

tion.

What to do if…

Warning! Refer to the Safety chapters.

Problem Possible cause Remedy

The oven does not heat up. The appliance is deactivated. Activate the appliance.