56999670en.
156999670en.
156999670en.qxp 3/6/2006 2:09 PM Pagina 3 Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents. it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features.
156999670en.qxp ● 3/6/2006 2:09 PM Pagina 4 Never use the dishwasher if the electrical supply cable and water hoses are damaged; or if the control panel, work top or plinth area are damaged such that the inside of the appliance is freely accessible. Contact your local Service Force centre, in order to avoid hazard. ● All sides of the dishwasher must never be drilled to prevent damage to hydraulic and electric components.
156999670en.qxp 3/6/2006 End of programme light Salt refilling light Rinse aid refilling light Delay start button 2:09 PM Pagina 5 Illuminates when the washing programme has ended. Switch of the dishwasher by returning the programme selector dial to the Off position. The On/Off indicator light turns off. It also has added functions of visual signalling as: - the setting of the water softener, - intervention of an alarm due to the malfunction of the machine.
156999670en.qxp 3/6/2006 2:10 PM Pagina 6 Programme table Programme Use Cycle description Intensive 70°C A Heavy soil. Crockery, cutlery, pots and pans Prewash - Main wash 2 intermediate rinses Final rinse - Dry Normal 65°C B Normal soil. Crockery and cutlery Prewash - Main wash 2 intermediate rinses Final rinse - Dry 30 min. 65°C C Light soil. Crockery and cutlery Main washFinal rinse Eco 50°C D Normal soil.
156999670en.qxp 3/6/2006 2:10 PM Pagina 7 Setting the water softener The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance. The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.
156999670en.qxp 3/6/2006 2:10 PM Pagina 8 Setting the water softener electronically (see table) The water softener is factory set at position 5. The dishwasher must be switched off Press and hold the start/cancel button and turn the programme selector dial clockwise till the first programme. Keep the button pressed until the programme selector indicator light and the start/cancel indicator light start flashing. Release the button. The end of programme indicator light will flash.
156999670en.qxp 3/6/2006 2:10 PM Pagina 9 Filling with dishwasher salt CAUTION! Use only special salt suitable for dishwashers Unscrew the cap. Only before filling with salt for the first time, fill the salt container with water Using the funnel provided, pour in the salt until the container is full. IMPORTANT! Immediately start a complete programme. IMPORTANT! The salt container will require topping up periodically. Remove any trace of salt.
156999670en.qxp 3/6/2006 2:10 PM Pagina 10 IMPORTANT! Top up the rinse aid when the light on the control panel illuminates. CAUTION! Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance. Adjusting the dosage of rinse aid Increase the dose if there are drops of water or lime spots on the dishes after washing. Open the lid.
156999670en.qxp 3/6/2006 2:10 PM Pagina 11 - To avoid damage to glasses, they must not touch. - Lay small objects in the cutlery basket. ● IMPORTANT! Before closing the door, ensure that the spray arms can rotate freely. Plastic items and pans with teflon have a tendency to retain water drops; these items will not dry as well as porcelain and steel items. Load cutlery. For best results we recommend you to use the cutlery grid provided (if the size and dimensions of the cutlery allow it).
156999670en.qxp 3/6/2006 2:10 PM Pagina 12 Adjusting the height of the upper basket If washing very large plates you can load them in the lower basket after moving the upper basket to the higher position. Maximum height of the dishes in: upper basket lower basket With upper basket raised 20 cm 31 cm With upper basket lowered 24 cm 27 cm IMPORTANT! Never lift or lower the basket on one side only. IMPORTANT! When the basket is in the higher position you will not be able to use the cup rack.
156999670en.qxp 3/6/2006 For programmes with prewash add an additional detergent dose in compartment B. 2:10 PM Pagina 13 When using detergent tablets: place detergent tablets in compartment A. Close the lid. Unloading the dishwasher IMPORTANT! Open the dishwasher’s door, leave it ajar and wait a few minutes before removing the dishes: hot dishes are sensitive to knocks. In this way they will be cooler and the drying will be improved.
156999670en.qxp 3/6/2006 Remove filter A from the base of the washing compartment. 2:10 PM Pagina 14 Put the flat filter A back in the base of the washing compartment and ensure that it fits perfectly under the two guides D. Replace the filters and lock by turning the handle clockwise to the stop. IMPORTANT! NEVER try to remove the spray arms. If residues of soil have clogged the holes in the upper spray arm, remove them with a toothpick.
6999670en.qxp 3/6/2006 2:10 PM Pagina 15 Environmental concerns Packaging material Old appliance The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities. The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
156999670en.qxp 3/6/2006 2:10 PM Pagina 16 Something not working IMPORTANT! The dishwasher will not start or stops during operation. Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the chart, without calling out an engineer. Switch off the dishwasher, open the door and carry out the following suggested corrective actions. Fault code / malfunction The dishwasher does not fill with water.
156999670en.qxp 3/6/2006 2:10 PM Pagina 17 The wash results are not satisfactory The dishes are not clean The wrong washing programme has been selected. The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. ● The spray arm do not rotate freely due to wrong arrangement of the load. ● The filters in the base of the washing compartment are dirty or incorrectly positioned. ● Too little or no detergent has been used.
156999670en.qxp 3/6/2006 2:10 PM Pagina 18 Technical data Dimensions Width Height Depth. 60 cm 85 cm 61 cm Electrical connection Voltage - Overall power - Fuse Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher’s door. Water supply pressure Minimum Maximum 0,05 MPa 0,8 MPa Capacity 12 place settings Max.
156999670en.qxp 3/6/2006 2:10 PM Pagina 19 Hints for test institutes Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Consumption values"). Test in accordance with EN 50242 must be carried out when the salt container and rinse aid dispenser have been filled with salt and rinse aid respectively and using the test programme (see "Consumption values").
156999670en.qxp 3/6/2006 2:10 PM Pagina 20 CAUTION! If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. Inlet hose Drain hose Connect the inlet hose to a water tap with an external thread of 3/4”. The inlet hose can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks.
156999670en.qxp ● 3/6/2006 2:10 PM Pagina 21 WARNING! Multi-way plugs, connectors and extension cables must not be used. This could constitute a fire hazard through overheating. ● If necessary, have the domestic wiring system socket replaced. In case that the electrical cable has to be replaced, contact your local Service Force centre. ● The plug must be accessible after the appliance has been installed. ● Never unplug the appliance by pulling on the cable. Always pull the plug.
156999670en.qxp 3/6/2006 2:10 PM Pagina 22 European Guarantee This appliance is guaranteed by Electrolux in each of the countries listed below for the period specified in the appliance guarantee or otherwise by law.
156999670en.qxp 3/6/2006 2:10 PM Pagina 23 Österreich Polska +43 18 66 400 +48 22 43 47 300 Portugal +35 12 14 40 39 39 Romania Schweiz/Suisse/Svizzera Slovenija Slovensko +40 21 44 42 581 +41 62 88 99 111 +38 61 24 25 731 +421 2 43 33 43 22 Suomi +35 8 26 22 33 00 Sverige +46 (0)771 76 76 76 Türkiye +90 21 22 93 10 25 Ðîññèÿ +7 095 937 7837 Herziggasse 9, 1230 Wien ul.
156999670en.qxp 3/6/2006 2:10 PM Pagina 24 www.electrolux.
