User manual

Minimal distances

Dimension mm

A 650

B 150

C 2

D 400

E 450

F less than 400

Levelling

Use small feet on the bottom of appliance to set same lev-

el of cooker top surface with other surfaces

The stability chain

Caution! You must install the stability chain. If you

do not install it the appliance can tilt.

Before you install stability chain, adjust the appliance to

the correct height.

Measure down 180 mm from the appliance top surface,

then measure right 30 mm (See picture). Mark the posi-

tion of the wall and this gives anchor point for the stability

chain.

30 mm

180 mm

Warning! These instructions are only valid in the

countries whose symbols appear on this booklet's

cover.

Gas Category I2H

Gas Supply G20 - 20 mbar

Gas burners

BURNER NORMAL POWER NATURAL GAS

kW inj. 100/mm Btu/h

Auxiliary burner 1,0 70 3412

Semi-rapid burner 1,9 96 6483

Rapid burner 3,0 119 10236

Grill 2,7 120 9212

Top Oven 1,9 99 6483

Main Oven 1,9 99 6483

Gas Connection

Use a flexible pipe in compliance with the regulation in

force. Be careful they do not come in touch with mobile

parts or they are not squeezed.

Warning! Only a qualified and competent person

must do the gas installation.