35668-6601 OPERATING AND INSTALLATION MANUAL ZANUSSI BUILT-IN OVEN MODEL ZBF 760 2
Important Safety Information These warnings are provided in the interest of safety. You MUST read them carefully before installing or using the appliance. Your safety is of paramount importance. If you are unsure about any of the meanings of these WARNINGS, contact the Customer Care Department Installation • The oven must be installed according to the instructions supplied. Any electrical work must be undertaken by a qualified electrician/competent person.
Contents For the User For the Installer Important safety information Technical Data Page 3 Description of the appliance Page 5 Controls Page 6 The Electronic Timer Page 7 Before the First Use Page 9 Using the Fan Oven Page 9 Cooking Chart Page 11 Defrosting Page 13 Grilling Page 14 Cleaning the Oven Page 15 Page 20 Electrical Connection Page 20 Installation Page 21 What happens if something goes wrong Page 18 Service and Spare Parts Page 19 Peace of Mind for 24 months Page
Description of the Appliance A U T O Thermostat Control Light °C Thermostat Control Knob 0 50 Electronic timer Oven Function Control Knob 100 MAX TIMER 20 0 150 Grill Element Oven Light Fan Grease Filter Rating Plate Removable handle Grill Pan Grid Grill / Roasting pan Anti-tip shelf (x 2) 5
Controls OFF Oven Function Control Knob Oven Light - The oven light will be on without any cooking function. Defrost Setting - This setting is intended to assist in thawing of frozen food (see page 13). 0 Oven Light Grill Fan ducted cooking - This allows you to roast or roast and bake simoultaneously using any shelf, without flavour transference. Grill - The heat comes only from the top element.
The Electronic Timer The electronic timer can indicate the time of day, operate as a minute minder and automatically operate the oven. Before the oven can be operated, the time of day must be set on the electronic timer. Please note that this is a 24 hour clock. For example, 2pm is shown as 14:00. In case of loss of power, all the settings (time of day, set program or program in operation), will be cancelled. When the power is restored, the numbers on the display will flash, and the timer has to be reset.
☞ MANUAL FUNCTION Press button to set the oven for manual function. TIMER ☞ TO SET THE TIMER TO SWITCH OFF ONLY This is useful if you want to begin cooking immediately but have the oven switch off automatically. 1. Set the oven function control knob and the thermostat control knob on the required settings. 2. Place food in the oven. and, at the same time, turn the 3. Press button TIMER time setting knob until the required cooking duration is displayed.
Before the First Use Remove all packaging, both inside and outside the oven, before using the appliance. Before first use, the oven should be heated without food. During this time, an unpleasant odour may be emitted. This is quite normal. ☞ 1. Set the electronic timer to manual function. 2. Switch the oven function control knob to fan cooking . 3. Set the thermostat control knob to MAX. 4. Open a window for ventilation. 5. Allow the oven to run empty for approximately 45 minutes.
The oven has four shelf levels, and is supplied with two anti-tip shelves. It is important that these shelves are correctly positioned as shown in the diagram. 4 3 ☞ How to Use the Fan Oven 2 1. Turn the oven function control knob to . 2. Turn the thermostat control to the required temperature. THINGS TO NOTE • The oven light will come on when the oven function control knob is set. • The oven fan will operate continually during cooking.
Cooking Chart This chart is intended as a guide only. It may be necessary to increase or decrease the temperature to suit your individual requirements. Only experience will enable you to determine the correct setting for your personal requirements.
i Hints and Tips Runner positions are not critical, but make sure the shelves are evenly spread. When cooking more than one dish in the fan oven, place dishes centrally on the shelves rather than several dishes on one shelf. When the oven is full, you may need to allow slightly longer cooking time. A shelf may be placed on the floor of the oven. Place dishes on a shelf in this position rather than on the oven base, to allow air circulation around the food. When the oven is full of the same food, e.g.
Defrosting i Hints and Tips The oven fan operates without heat and circulates the air, at room temperature, inside the oven. This increases the speed of defrosting. However, please note that the temperature of the kitchen will influence the speed of defrosting. This function is particularly suitable for delicate food which could be damaged by heat, e.g. cream filled gateaux, iced cakes, pastries, bread and other yeast products.
Grilling Grilling must be carried out with the oven door closed. The grill pan handle must be removed from the pan. ☞ How to Use the Grill 1. Turn the oven control function knob on COOKING CHART Cooking time depends on the thickness of the meat and not on its weight. Type of food . 2. Turn the thermostat control knob on the required temperature. 3. Adjust the grid and grill pan runner position to allow for different thicknesses of food.
Cleaning the Oven Before cleaning always allow the cooling fan to cool the cooker down before switching off at the electricity supply. The oven should be kept clean at all times. A build-up of fats or other foodstuffs could result in a fire, especially in the grill pan. Cleaning materials Before using any cleaning materials on your oven, check that they are suitable and that their use is recommended by the manufacturer. Cleaners that contain bleach should NOT be used as they may dull the surface finishes.
Oven Cavity The enamelled oven cavity is best cleaned whilst the oven is still warm. Wipe the oven over with a soft cloth soaked in warm soapy water after each use. From time to time it will be necessary to do a more thorough cleaning, using a proprietary oven cleaner. If the soilage has become set, after the oven has cooled down, the following process will help to soften the splatters to help make cleaning easier. the grill/ meat pan on the oven shelf ☞ 1. Place positioned in the lowest runner. 2.
Replacing The Oven Light If the oven bulb needs replacing, it must comply with the following specifications: - Electric power: 15W, - Electric rate: 220-240 V (50 Hz), - Resistant to temperatures of 300°C, - Connection type: E14. These bulbs are available from your local Zanussi Force Service Centre. To replace the faulty bulb: FO 0287 1. Ensure the oven is isolated from the electrical supply. 2. Push in and turn the glass cover anticlockwise. 3. Remove the faulty bulb and replace with the new one. 4.
If something goes wrong If the appliance is not working correctly, please carry out the following checks, before contacting your local Zanussi Service Centre. SYMPTOM ■ The oven does not come on SOLUTION ◆ Check the oven is in manual operation and that both a cooking function and temperature have been selected. ◆ Check the appliance is wired in properly, and the socket switch or the switch from the mains supply to the oven are ON.
Service and Spare Parts If you require spare parts or an engineer contact your local Service Force Centre by telephoning: 0990-929929 For further details, please see the accompanying Customer Care Booklet. CUSTOMER CARE DEPARTMENT For general enquiries concerning your Zanussi appliance, contact our Customer Relations Department by letter or telephone as follows: Customer Care Department Zanussi House Hambridge Rd.
Technical Data DIMENSIONS OF RECESS Height Width Depth 580 mm. 560-570 mm. 550 mm. DIMENSIONS OF THE OVEN CAVITY Height Width Depth Oven capacity 320 mm. 420 mm. 390 mm. 53.2 litres Heating elements rating Oven element Grill element Convenction Fan Oven Light Cooling Fan Total Rating 2.5 kW 1.8 kW 30 W 15 W 25 W 2.570 kW Electrical Connection We strongly recommend that all operations for the installation of your cooker be carried out by QUALIFIED PERSONNEL to the relevant British Standards.
Installation The oven must be installed according to the instructions supplied. Any electrical work must be undertaken by a qualified electrician/competent person, in accordance with existing rules and regulations. It is dangerous to alter the specifications or modify the appliance in any way. Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of a breakdown.
