ZANUSSI WASHING MACHINE T 833 V T 733 V 146 3866 01 - 02/05 INSTRUCTIONS MANUAL
CONTENTS For the user Safety instructions For the installer 3/4 Technical information 18 Description of the appliance 5 Use of your appliance 6 Unpacking 18 Operating instructions 7/8 Installation 19 Levelling 19 Moving of the appliance 19 Water connection 20 Electrical connection 20 Programme chart Hints & Tips Cleaning and maintenance If something doesn't work Service Installation 9/10 11-13 14 15/16 17 Guide to use the instruction The following symbols will be found in the text t
SAFETY INSTRUCTIONS You must read the whole of this instruction book before using the appliance. Follow the advice carefully. Keep the book for future reference. If you sell or give away the appliance, make sure that the book is passed to the new owner. The following warnings are provided in the interest of overall safety. You must read them before installing or using the appliance. Small and delicate objects (e.g.
Safeties Environmental information Lid : your washing machine is equipped with a safety avoiding the switching of the appliance when the flapdoors of the drum are opened ; the closure of the lid is so impossible. An electromechanic safety prohibits the opening of the lid when the washing machine works and 2 minutes after the end of the programme. All materials marked by the symbol are biodegradable. They can be disposed of without danger or burnt in rubbish incinerators.
DESCRIPTION OF THE APPLIANCE Programme selector Spinning speed variator Temperature selector Pushbuttons Control panel Control lamp Lid Handle for opening lid Lever for castors Trap door for lint filter Detergent dispenser Symbols Washing powder for programmes with pre-wash. Washing powder or liquid detergent for the main wash. Bleach compartment. Liquid additives (fabric softener and conditioner...). 5 Softener overflow.
USE OF YOUR APPLIANCE The control panel Never turn the programme selector when the appliance is working. 2 1 3 4 5 6 and the following options: 1. ON/OFF pushbutton " " Press the on/off pushbutton, the programme starts : the control lamp illuminates. the draining position " " in order to not spin the laundry at the end of the cycle, the rinse hold position " " so as to not drain the water of the last rinse so that not creased the laundry if this one is not immediately unloaded of the drum. 2.
OPERATING INSTRUCTIONS Before using your washing machine for the first time, we recommend that you do a preliminary wash with the machine empty, as a precaution to clean the drum, tank and the product box. 1. Pour a dose of detergent in the “washing” detergent dispenser. 2. Select the programme B 90°C. 3. Press the on/off pushbutton " ". 1. Place the laundry in the drum Lift the lid. Open the drum by pressing the release button A. The two flapdoors will open automatically.
6. Select the temperature Choose the temperature which corresponds to the chosen programme, with the help of the indications or the programme table, according to the fibers and the fastness of the colours. 7.
PROGRAMMES CHART Programmes for cotton/linen Maximum load : 5,0 kg (cotton) Indicative consumptions* Programmes A B Description of the programme D Description of the cycle Water (l) Energy (kWh) Time (min) 60° - 90° Prewash to 40° Wash to 60°- 90° 3 rinsings Spinning 73 2,20 155 30° - 90° Wash to 30°- 90° 3 rinsings Spinning 61 1,90 135 Wash to - 30° 3 rinsings Short spinning 48 0,20 35 Rinsings 4 rinsings Spinning 65 0,20 60 Spinning T 833 V : from 300 to 850 rpm T 733 V : from
Programmes for synthetics/delicates/wool Maximum loads : 2,5 kg (synthetics), 1 kg (wool). Indicatives consumptions* Programmes H J Description of the programme Temp.
HINTS AND TIPS Resistant white and coloured synthetics can normally be washed at 60°C but also in this case 40°C is sufficient if the laundry is not excessively dirty. Delicate synthetics, synthetics with non-fast colours and woollen garments must never be washed above 40°C. As you already know, your washing machine can also wash with cold water.
To remove paint stains, for example, use a volatile substance such as turpentine: in this case, you should wait for it to dry completely before washing. The manufacturer of your washing machine is not responsible for any damage deriving from the use of volatile, inflammable or toxic substances. Liquid detergents Using the new automatic dispenser for liquid detergents, it is possible to use a liquid detergent for main wash phases if you start the washing machine immediately.
Wash code symbols These symbols appear on fabric label, in order to help you to choose the best way to treat your laundry. STRONG WASH Max. wash Temperature Temperature Temperature 60°C 40°C 95°C Temperature 30°C Do not wash at all Hand wash DELICATE WASH Bleach in cold water BLEACHING Do not bleach IRONING Hot iron max 200°C Warm iron max. 150°C Lukewarm iron max.
CLEANING AND MAINTENANCE Make sure that the machine is unplugged and the water tap turned off before undertaking any kind of maintenance. Bodywork The outside or the machine can be cleaned with warm water and a neutral non-abrasive household detergent. Wipe with clean water and dry after cleaning. Important : do not use methylated spirit, diluents or similar products. It is advisable, from time to time, to carry out a complete cycle without a washing load, adding a decalcifying product.
IF SOMETHING DOESN'T WORK ? Problems Solutions The wash results are not as usual. Check that : was the wrong quantity or the wrong detergent added ? Insufficient detergent leads to grey washes and scale deposits in the machine. Check the quantities more exactly. Were special stains pre-treated ? Were programme and temperature correctly chosen ? The washing cycle is very much too long. Check that : the water pression is sufficient, the pump filter is not obstructed, there has not been a power breakdown.
IF SOMETHING DOESN'T WORK ? Problems Solutions The machine vibrates or is too noisy. Check that : all the transit bolts and packing have been removed, all the feet resting firmly on the ground, the lock nuts have been secrured, the machine does not touch something, the load is sufficent. The machine empties as it fills. Check that : the end of the drain hose is not too low. There is water on the floor. Check that : there is not too much detergent or unsuitable detergent.
SERVICE If you are not able to identify or to solve the problem, consult our service department. Before calling, note the brand, model and date of purchase of your machine : the service department will require this information. Data plate You will find this information on the data plate (at the back of the appliance) and on a sticker located on the internal door filter. Protection against pests You can request to your Service Department the protection against pests in order to put it under the appliance.
FOR THE INSTALLER Technical information Dimensions height with panel height without panel width depth Power supply voltage / frequency Total power absorbed Heater rating Water pressure minimum maximum Maximum load cotton synthetics wool Spinning speed Cotton, synthetics, wool - T 733 V - T 833 V Delicates 895 mm 850 mm 397 mm 600 mm 230 V / 50 Hz 2300 W (10 A) 1950 W 0,05 MPa (0,5 bar) 0,8 MPa (8 bar) 5,0 kg 2,5 kg 1,0 kg from 300 to 750 rpm from 300 to 850 rpm from 300 to 650 rpm This appliance complies
Installation The floor must be clean and dry, free from floor polish and other greasy substances, so that the machine does not slide about. Do not use any grease as lubrification. Installation on deep pile carpets and floor coverings with foam backings is not recommended, as the stability of the machine is no longer guaranteed. If the installation must be done on a carpeted floor, the openings located at the lower part of the back of the appliance must remain free.
Water connection Connect the water inlet hose to a cold water tap with a 3/4" gas threaded orifice, after having inserted the rugger sealing washer into the hose collar (fig.1). If the water connection is made onto new pipes or onto pipes which have not been used for a long time, it is advisable to run off a certain amount of water before connecting the machine. Place the curved end of the outled hose into a drain pipe having a height between 70 and 100 cm from floor level (fig.