EN User manual Ceramic glass induction hob ZIT64BV 2
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Installation instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Operating instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 3 5 6 Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10 Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ 11 Subject to change without notice Safety information For your safety a
Installation instructions Before the installation , note down this data from the rating plate: • Model description (Modell)................ • Product number (Prod. Nr.) ............. .... • Serial number (Ser. Nr.) ............... You find the rating plate of the appliance on its lower casing. ZIT64BV 58 GAD D5 AU 220-240 V 50-60-Hz 949 594 113 00 Induction 7,4 kW 7,4 kW ZANUSSI Safety instructions Warning! You must read these! Make sure that the appliance is not damaged because of transportation.
Assembly min. 500 mm min. 50 mm min. 50 mm min. 5 mm R 5mm 600mm = 490+1mm 560+1mm = min. 20 mm 4 min. 25 mm min. 5 mm min. 38 mm min.
Product description Cooking surface layout 1 2 180 180 210 145 mm 1 Induction cooking zone 1800W 2 Induction cooking zone 1800W 3 Induction cooking zone 1400 W, with Power function 2500W 4 Control panel 5 Induction cooking zone 2300W, with the Power function 3700W mm 3 mm mm 5 4 Control panel layout 1 2 3 4 5 6 B B 9 8 7 Use the sensor fields to operate the appliance. Displays, indicators and sounds tell which functions operate.
sensor field function actives Power function 9 Heat setting displays Display Description The cooking zone is off Keep warm is active The cooking zone operates - Automatic heat up function is active The induction cooking zone does not sense the cookware There is a malfunction A cooking zone is still hot (residual heat) Lock/Child safety device is on Power function is active The automatic switch off is active ceramic is slightly heated by the residual heat of the cookware.
The heat setting Touch to increase the heat setting. Touch to decrease the heat setting. The display shows the heat setting. Touch and cooking zone. at the same time to switch off the The automatic heat up Automatic heat up function sets the highest heat setting ) for some time, and then decreases to the nec(not essary level. and than set necTo start function touch the symbol essary heat setting. comes on when the cooking zone operates on highest heat setting. To stop the function change heat setting.
Touch the symbol . The symbol comes on for 4 seconds. The Timer still operates. Touch the symbol to switch off this function. The heat setting that you set before comes on. When you switch off the appliance, you also switch off this function. Switching off the child safety device • Start the hob with . comes on. Touch the acoustic signal. comes on • Switch off the appliance. The child safety device • Touch until the acoustic signal. The symbol comes on. Set the heat setting in less than 10 seconds.
Heat setting 1 Use to: Keep cooked foods warm Time as required Hints Cover 1-2 Hollandaise sauce, melt: butter, chocolate, ge- 5-25 min latine Mix occasionally 1-2 Solidify: fluffy omelettes, baked eggs Cook with a lid on 2-3 Simmer rice and milkbased dishes, heating up 25-50 ready-cooked meals min Add at least twice as much liquid as rice, stir milk dishes part way through 3-4 Steam vegetables, fish, meat 20-45 min Add a few tablespoons of liquid 4-5 Steam potatoes 20-60 min Use max.
What to do if… Problem Possible cause and remedy You cannot start the appliance or op- • You touched 2 or more sensor fields at the same time. Only touch one erate it. sensor field. • There is water or fat stains on the control panel. Clean the control panel. • The child safety device or key lock operates. See the chapter Operating the appliance. • Start the appliance again and set the heat setting in 10 seconds.
Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
www.zanussi.com 892935135-A-012010 www.zanussi.
