User manual

ENGLISH

4. Select the desired option

Depress the required button.

5. Select the temperature

Turn the dial to the required setting.

6. Select the programme and start the

machine

Turn the programme selector dial clockwise to the

required programme and press ON/OFF button :

the mains on light comes on and the machine starts

to operate.

P0080

M0046

M0045

Operating sequence

Before the first wash we recommend that you pour 2

litres of water into the main wash compartment

of the detergent drawer in order to activate the ECO

valve. Then run a cotton cycle at 60°C, with the

machine empty, in order to remove any

manufacturing residue from the drum and tub.

Pour half a measure of detergent into the main wash

compartment and start up the machine.

1. Place the laundry in the drum

Open the door.

Place the laundry in the drum, one item at a time,

shaking them out as much as possible.

Close the door.

2. Measure out the detergent

Pull out the dispenser drawer until it stops. Measure

out the amount of detergent recommended by the

manufacturer in a graduated cup and pour it into the

main wash compartment .

If you wish to carry out the prewash, pour detergent

into the appropriate compartment marked .

3. Measure out the additive

If required, pour fabric softener into the compartment

marked , without exceeding the «MAX» mark.

C0071

C0070

P0004

132992280 gb.qxd 4/7/03 10:11 AM Pagina 11 (Nero/Process Black pellicola)