01EN_00_RX-V1065_U.book Page i Tuesday, March 31, 2009 6:42 PM Black process 45.0° 240.
01EN_00_RX-V1065_U.book Page i Tuesday, March 31, 2009 6:42 PM IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
01EN_00_RX-V1065_U.book Page ii Tuesday, March 31, 2009 6:42 PM Caution: Read this before operating your unit. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit.
01EN_00_RX-V1065_U.book Page 1 Tuesday, March 31, 2009 6:42 PM Contents INTRODUCTION Front panel ................................................................. 4 Rear panel .................................................................. 5 Front panel display..................................................... 6 Remote control........................................................... 7 Quick start guide..................................................... 8 L Connecting the SiriusConnect™ tuner .
01EN_00_RX-V1065_U.book Page 2 Tuesday, March 31, 2009 6:42 PM INTRODUCTION Features ■ Built-in 7-channel power amplifier • Minimum RMS Output Power (20 Hz to 20 kHz, 0.08% THD, 8 Ω) • FRONT L/R: 105 W + 105 W • CENTER: 105 W • SURROUND L/R: 105 W + 105 W • SURROUND BACK L/R: 105 W + 105 W ■ Speaker/Preout outputs • Speaker terminals (7-channel), extra speaker terminals (2-channel for presence or Zone2), preout jacks (7.
01EN_00_RX-V1065_U.book Page 3 Tuesday, March 31, 2009 6:42 PM About this manual PREPARATION Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories “HDMI”, the “HDMI” logo and “High-Definition Multimedia Interface” are trademarks, or registered trademarks of HDMI Licensing LLC. x.v.Color “x.v.Color” is a trademark of Sony Corporation. iPod™ “SILENT CINEMA” is a trademark of Yamaha Corporation.
01EN_00_RX-V1065_U.book Page 4 Tuesday, March 31, 2009 6:42 PM Part names and functions Front panel A BC D E F G H I J HDMI THROUGH VOLUME ZONE2 CONTROL ZONE2 ON/OFF INFO l MEMORY PRESET FM l h AM CATEGORY l h TUNING/CH h SCENE BD/DVD TV RADIO CD INPUT PROGRAM MAIN ZONE PHONES TONE CONTROL PURE DIRECT STRAIGHT VIDEO AUX OPTIMIZER MIC USB ON/OFF EFFECT SILENT CINEMA K A L M N O ZONE2 ON/OFF P Q M Switches the zone function on and off (page 62).
01EN_00_RX-V1065_U.book Page 5 Tuesday, March 31, 2009 6:42 PM Part names and functions Rear panel b SIRIUS DOCK c d e f XM HDMI OUT g HDMI 2 HDMI 1 HDMI 4 HDMI 3 h i INTRODUCTION a ANTENNA (BD/DVD) HD Radio GND FM AM UNBAL. EXTRA SP ZONE2/PRESENCE PHONO SPEAKERS MONITOR OUT COMPONENT VIDEO COMPONENT VIDEO SINGLE CLASS 2 WIRING REMOTE PR IN GND PREPARATION PR OUT PB VIDEO PB VIDEO Y Y 12V 0.1A MAX.
01EN_00_RX-V1065_U.book Page 6 Tuesday, March 31, 2009 6:42 PM Part names and functions Front panel display ab c SIRIUS XM d e f g h i HD TAG j k SLEEP ZONE 2 STEREO 3 TUNED l VOL. MUTE SW PL PR C L R SL SR SBL SB SBR m a b n HDMI indicator i ZONE2 indicator Lights up during normal communication when HDMI is selected as an input source. j SLEEP indicator k MUTE indicator Lights up when a SiriusConnect tuner is selected as an input source.
01EN_00_RX-V1065_U.book Page 7 Tuesday, March 31, 2009 6:42 PM Part names and functions Remote control n a ZONE2 b POWER SOURCE c FM/AM (CATEGORY l / h) CODE SET TRANSMIT POWER SLEEP o p MEMORY PRESET k / n TUN./CH k / n HDMI 2 3 4 1 2 3 4 5 6 1 2 V-AUX PHONO USB DOCK TUNER SIRIUS XM MULTI g Sound selection keys PRESET TUN./CH h SCENE q f AUDIO f INFO Selects sound field programs (page 25).
01EN_00_RX-V1065_U.book Page 8 Tuesday, March 31, 2009 6:42 PM Quick start guide When you use this product for the first time, perform setup following the steps below. See the related pages for details on operations and settings. Step 1: Prepare items for setup Step 2: Set up your speakers Prepare speakers, DVD player, cables, and other items necessary for setup. For example, prepare the following items for setting up a 7.1-channel sound system.
01EN_00_RX-V1065_U.book Page 9 Tuesday, March 31, 2009 6:42 PM PREPARATION Preparing remote control 1 Using the remote control The remote control transmits a directional infrared ray. Be sure to aim the remote control directly at the remote control sensor on this unit during operation. 3 Remote control sensor window PREPARATION 2 within 6 m (20 ft) 2 Insert the two supplied batteries (AAA, R03, UM-4) according to the polarity markings (+ and –) on the inside of the battery compartment.
01EN_00_RX-V1065_U.book Page 10 Tuesday, March 31, 2009 6:42 PM Connections Placing speakers This unit supports up to 7.1-channel surround. We recommended the following speaker layout in order to obtain the optimum surround effect. 7.1-channel speaker layout Speaker channels C FR FL SW SW 30˚ SL SR 60˚ 80˚ SL SR SBL SBR 30 cm (12 in) or more 6.1-channel speaker layout C FR FL SW SW SR 60˚ SL 80˚ SR SB 5.
01EN_00_RX-V1065_U.book Page 11 Tuesday, March 31, 2009 6:42 PM Connections 0.5 to 1 m (1 to 3 ft) 0.5 to 1 m (1 to 3 ft) PL PR FL FR 1.8 m (6 ft) 1.8 m (6 ft) C INTRODUCTION ■ Presence left and right speakers (PL and PR) The presence speakers supplement the sound from the front speakers with extra ambient effects produced by the sound field programs (page 25). We recommend that you use the presence speakers especially for the CINEMA DSP sound field programs.
01EN_00_RX-V1065_U.book Page 12 Tuesday, March 31, 2009 6:42 PM Connections Caution • A speaker cable is a pair of insulated cables running side by side in general. One of the cables is colored differently or striped to indicate a polarity. Connect one end of the colored/striped cable to the “+” (red) terminal of this unit and the other end to that of your speaker, and connect one end of the other cable to the “–” (black) terminal of this unit and the other end to that of your speaker.
01EN_00_RX-V1065_U.book Page 13 Tuesday, March 31, 2009 6:42 PM Connections Information on jacks and cable plugs ■ ■ Audio jacks Jack and cables Analog audio jacks (white) To transmit conventional analog stereo audio signals. Use stereo pin cables. Connect red plugs to red jacks (R) and white plugs to white jacks (L). (red) To transmit coaxial digital audio signals. Use pin cables for digital audio signals. (orange) HDMI jacks HDMI Description To transmit digital video and digital audio signals.
01EN_00_RX-V1065_U.book Page 14 Tuesday, March 31, 2009 6:42 PM Connections Connecting a TV monitor or projector According to the types of video input jacks available on your video monitor (such as a TV or projector), choose one of the connection methods as shown below. When you connect video players such as a DVD player to this unit with an HDMI connection, connect your video monitor to this unit with an HDMI connection.
01EN_00_RX-V1065_U.book Page 15 Tuesday, March 31, 2009 6:42 PM Connections Connecting other components Note • Make sure that this unit and other components are unplugged from the AC wall outlets.
01EN_00_RX-V1065_U.
01EN_00_RX-V1065_U.book Page 17 Tuesday, March 31, 2009 6:42 PM Connections HDMI 2 HDMI 1 Connecting a USB storage device Connect a USB memory device or USB portable audio player to the USB port on the front panel of this unit. For information about USB storage devices supported by this unit, see page 45.
01EN_00_RX-V1065_U.book Page 18 Tuesday, March 31, 2009 6:42 PM Connections Connecting the FM and AM antennas An indoor FM antenna and an AM loop antenna are supplied with this unit. Connect these antennas properly to the respective jacks. Indoor FM antenna Outdoor AM antenna Connect a 5 to 10 m (16 to 33 ft) vinyl-covered wire, and extend it outdoors (use the AM loop antenna together with this antenna).
01EN_00_RX-V1065_U.book Page 19 Tuesday, March 31, 2009 6:42 PM Optimizing the speaker setting for your listening room (YPAO) 2 Connect the supplied optimizer microphone to the SOPTIMIZER MIC jack on the front panel. INPUT VIDEO AUX OPTIMIZER MIC VIDEO USB PREPARATION Caution • Be advised that it is normal for loud test tones to be output during the “Auto Setup” procedure. Do not allow small children to enter the room during the procedure.
01EN_00_RX-V1065_U.book Page 20 Tuesday, March 31, 2009 6:42 PM Optimizing the speaker setting for your listening room (YPAO) 4 5 When measurement is successfully completed, “YPAO Complete” appears on the front panel display and the measurement result appears on the GUI screen. When the speakers are connected to EXTRA SP terminals, press jCursor k repeatedly to select “Extra Speaker Assignment” and then press jCursor l / h to select how to use EXTRA SP terminals from “Zone2”, “Presence” or “None”.
01EN_00_RX-V1065_U.book Page 21 Tuesday, March 31, 2009 6:42 PM Optimizing the speaker setting for your listening room (YPAO) When an error message is displayed during measurement INTRODUCTION If an error is detected during measurement, the measurement is canceled and “Error” appears on the GUI screen. Check the error and solve the problem. For details on each error message, see page 75. Press jCursor n once, press jCursor l / h to select “Retry” or “Exit” and then press jENTER.
01EN_00_RX-V1065_U.book Page 22 Tuesday, March 31, 2009 6:42 PM BASIC OPERATION Playback 4 Basic procedure 1 2 Turn on external components (TV, DVD player, etc.) connected to this unit. Rotate the RINPUT selector (or press dInput selection key) to select an input source. The name of the selected input source is displayed for a few seconds. Input source name VOL. AV1 y • You can also select an input source from the GUI screen (page 23).
01EN_00_RX-V1065_U.book Page 23 Tuesday, March 31, 2009 6:42 PM Playback Registering input source/sound field program y • If you change the input source setting, register the remote control code of an external component to the input source (page 63). 1 Register the remote control code of an external component to the desired input source (page 63). Note • This feature is not available for TUNER, SIRIUS and XM input sources.
01EN_00_RX-V1065_U.book Page 24 Tuesday, March 31, 2009 6:42 PM Playback Press QPURE DIRECT (or gPURE DIRECT) to turn the Pure Direct mode on or off. QPURE DIRECT lights up when you set Pure Direct mode on. The following features are disabled in the Pure Direct mode. – sound field program, tone control – display and operation of the Option menu and Setup menu – multi-zone function Changing information on the front panel display Press DINFO (or fINFO) repeatedly.
01EN_00_RX-V1065_U.book Page 25 Tuesday, March 31, 2009 6:42 PM Enjoying the sound field programs This unit is also equipped with a Yamaha digital sound field processing (DSP) chip. You can enjoy multi-channel sounds for almost all input sources using various sound field programs stored on the chip and a variety of surround decoders. INTRODUCTION Selecting sound field programs ■ Selecting a sound field program on the front panel Rotate the NPROGRAM selector to select a desired sound field program.
01EN_00_RX-V1065_U.book Page 26 Tuesday, March 31, 2009 6:42 PM Enjoying the sound field programs Program Descriptions Drama This sound field features stable reverberations that match a wide range of movie genres from serious dramas to musicals and comedies.
01EN_00_RX-V1065_U.book Page 27 Tuesday, March 31, 2009 6:42 PM Enjoying the sound field programs For multi-channel stereo reproduction (STEREO) Program Use this program to output sound from all speakers. When you play back multi-channel sources, this unit downmixes the source to 2 channels and then outputs the sound from all speakers. This program creates a larger sound field and is ideal for background music at parties, etc.
01EN_00_RX-V1065_U.book Page 28 Tuesday, March 31, 2009 6:42 PM Enjoying the sound field programs Enjoying unprocessed input sources (Straight decode mode) In straight decode mode, sounds are reproduced without sound field effect. 2-channel stereo sources are output from only the front left and right speakers. Multi-channel input sources are decoded straight into the appropriate channels and multi-channel sounds are reproduced without a sound field effect.
01EN_00_RX-V1065_U.book Page 29 Tuesday, March 31, 2009 6:42 PM FM/AM tuning The FM/AM tuner of this unit provides the following two modes for tuning. ■ Preset tuning mode You can preset the frequencies of FM/AM stations by registering them to specific numbers, and later just select those numbers to tune in. • You can switch between stereo and monaural for FM broadcast in the Option menu (page 48). • (U.S.A. model only) When tuning in to an HD Radio station, the HD indicator lights up.
01EN_00_RX-V1065_U.book Page 30 Tuesday, March 31, 2009 6:42 PM FM/AM tuning y • You can select the preset number at which the preset starts by pressing ePRESET k / n or jCursor k / n while “READY” is displayed on the front panel display. • To cancel registration, press jRETURN. 4 y Status • To cancel registration, press jRETURN or leave this unit without any operations for about 30 seconds. 01:FM 87.
01EN_00_RX-V1065_U.book Page 31 Tuesday, March 31, 2009 6:42 PM Using HD Radio™ features (U.S.A. model only) Notes Selecting HD Radio™ audio programs ■ HD WXYZ-FM When multiple audio programs are provided Audio program number (relative/total) Lights up Audio program number (absolute) BASIC OPERATION The HD indicator lights up in the front panel display when this unit is tuned into an HD Radio reception band.
01EN_00_RX-V1065_U.book Page 32 Tuesday, March 31, 2009 6:42 PM Using HD Radio™ features (U.S.A. model only) y • This unit transmits the “tag” data to the iPod if an iPod that supports iTunes Tagging feature is stationed in the Yamaha iPod universal dock (YDS-11, sold separately) connected to the DOCK terminal of this unit. Otherwise, this unit stores the “tag” data (up to 50) in the internal memory and will transmit it next time your iPod is stationed.
01EN_00_RX-V1065_U.book Page 33 Tuesday, March 31, 2009 6:42 PM XM® Satellite Radio tuning (U.S.A. model only) Satellite Radio delivers a variety of commercial-free music from categories ranging from Pop, Rock, Country, R&B, Dance, Jazz, Classical and many more plus coverage of all the top professional and college sports including play by play games from select leagues and teams.
01EN_00_RX-V1065_U.book Page 34 Tuesday, March 31, 2009 6:42 PM XM® Satellite Radio tuning (U.S.A. model only) XM Satellite Radio® operations 1 ■ Category Search mode 1 Press GCATEGORY l / h (or eCATEGORY l / h) to select the channel category. “CAT” is displayed on the front panel display during the channel category selection. When you select the category, the first channel in the category is selected. Rotate the RINPUT selector (or press dXM) to select “XM” as the input source.
01EN_00_RX-V1065_U.book Page 35 Tuesday, March 31, 2009 6:42 PM XM® Satellite Radio tuning (U.S.A. model only) Registering XM Satellite Radio channels Prior to selecting a preset channel in the Preset Search mode, you must preset XM channels. For details, see “Registering preset channels” on this page. Preset channel number XM Registering preset channels Search a channel you want to set as a preset channel in one of the XM Satellite Radio search modes.
01EN_00_RX-V1065_U.book Page 36 Tuesday, March 31, 2009 6:42 PM XM® Satellite Radio tuning (U.S.A. model only) Displaying the XM Satellite Radio™ information Use this feature to display the XM Satellite Radio information on the front panel display or on the GUI screen. ■ GUI screen Press tDISPLAY on the remote control to turn on or off the information display. The following information is displayed on the GUI screen.
01EN_00_RX-V1065_U.book Page 37 Tuesday, March 31, 2009 6:42 PM SIRIUS Satellite Radio™ tuning (U.S.A. model only) Connecting the SiriusConnect™ tuner SiriusConnect Tuner and the antenna (sold separately) Rotate the RINPUT selector (or press dSIRIUS) to select “SIRIUS” as the input source. 2 Press l0 and then lENT to display the Sirius ID of your SiriusConnect tuner.
01EN_00_RX-V1065_U.book Page 38 Tuesday, March 31, 2009 6:42 PM SIRIUS Satellite Radio™ tuning (U.S.A. model only) 2 Search for a channel by using one of the SIRIUS Satellite Radio search modes. • To select a channel from the all channel list, see “All Channel Search mode” on this page. • To select a channel by category, see “Category Search mode” on this page. • To select the desired channel directly by entering the channel number, see “Direct number access” on this page.
01EN_00_RX-V1065_U.book Page 39 Tuesday, March 31, 2009 6:42 PM SIRIUS Satellite Radio™ tuning (U.S.A. model only) Registering SIRIUS Satellite Radio™ channels Prior to selecting a preset channel in the Preset Search mode, you must preset SIRIUS channels. For details, see “Registering preset channels” on this page. SIRIUS 001 Hits 1 Registering preset channels Search a channel you want to set as a preset channel in one of the SIRIUS Satellite Radio search modes.
01EN_00_RX-V1065_U.book Page 40 Tuesday, March 31, 2009 6:42 PM SIRIUS Satellite Radio™ tuning (U.S.A. model only) Setting the Parental Lock 6 Press jCursor l / h to select the category of a channel you want to lock. You can use the Parental Lock feature to limit the access to the desired SIRIUS Satellite channels. This unit automatically skips the locked channels when this unit is in the All Channel Search mode or Category Search mode and you search a channel by pressing HTUNING/CH l / h (or eTUN.
01EN_00_RX-V1065_U.book Page 41 Tuesday, March 31, 2009 6:42 PM SIRIUS Satellite Radio™ tuning (U.S.A. model only) Displaying the SIRIUS Satellite Radio™ information Note • If a status message or an error message appears on the front panel display or GUI screen, see “SIRIUS Satellite Radio” (page 72). ■ Front panel display Channel Antenna y • You can configure the scroll setting of the front panel display with “Front Panel Display Scroll” in the Setup menu (page 59).
01EN_00_RX-V1065_U.book Page 42 Tuesday, March 31, 2009 6:42 PM Using iPod™ Once you have stationed your iPod in a Yamaha iPod universal dock (such as the YDS-11, sold separately) connected to the DOCK terminal on the rear panel of this unit (page 17), you can enjoy playback of your iPod using the supplied remote control or the menu displayed on the GUI screen.
01EN_00_RX-V1065_U.book Page 43 Tuesday, March 31, 2009 6:42 PM Using iPod™ 4 Press jCursor k / n / l / h to select a menu item and then press jENTER to start playback. ■ 1 Press tDISPLAY to switch to menu browse mode while “DOCK” is selected as the input source. 2 Press rOPTION on the remote control. The Option menu for “iPod” is displayed (page 47). 3 Press jCursor k / n to select “Shuffle” or “Repeat” and then press jENTER. 4 Press jCursor l / h to select the desired playback style.
01EN_00_RX-V1065_U.book Page 44 Tuesday, March 31, 2009 6:42 PM Using Bluetooth™ components You can connect a Yamaha Bluetooth wireless audio receiver (such as YBA-10, sold separately) to the DOCK terminal of this unit and enjoy the music contents stored in your Bluetooth component (such as a portable music player) without wiring between this unit and the Bluetooth component. You need to perform “Pairing” the connected Bluetooth wireless audio receiver and your Bluetooth component in advance.
01EN_00_RX-V1065_U.book Page 45 Tuesday, March 31, 2009 6:42 PM Using USB storage devices Notes • You can play back only the files stored in the first partition. • Some files may not be playable depending on models and types of USB storage devices.
01EN_00_RX-V1065_U.book Page 46 Tuesday, March 31, 2009 6:42 PM Other functions Using the sleep timer 3 Turn off the TV. Other HDMI control devices are also turned off in conjunction with the TV. If not, turn off them manually. 4 Turn on the TV. Other HDMI control devices are also turned on in conjunction with the TV. If not, turn on them manually. 5 Select this unit as the input source of the TV. 6 Turn on the HDMI control device (DVD player or Blu-ray player) connected to this unit.
01EN_00_RX-V1065_U.book Page 47 Tuesday, March 31, 2009 6:42 PM ADVANCED OPERATION Setting the option menu for each input source (Option menu) 1 Press rOPTION on the remote control. The Option menu for the selected input source is displayed. For details about the Option menu items of each input source, see “Option menu items” on this page. Option menu items The following menu items are provided for each input source.
01EN_00_RX-V1065_U.book Page 48 Tuesday, March 31, 2009 6:42 PM Setting the option menu for each input source (Option menu) Decoder Mode Input source: HDMI1-4, AV1-4 Choices: Auto*, DTS Selects DTS digital audio signals for reproduction. Auto DTS Automatically selects audio input signals. Selects DTS signals only. Other input signals are not reproduced.
01EN_00_RX-V1065_U.book Page 49 Tuesday, March 31, 2009 6:42 PM Setting the option menu for each input source (Option menu) Shuffle Input source: iPod (DOCK), USB Choices: iPod (DOCK): Off*, Songs, Albums USB: Off*, On Repeat Input source: iPod (DOCK), USB Choices: Off*, One, All Changes the repeat playback style. Connect / Disconnect Connects to or disconnects from a Bluetooth component.
01EN_00_RX-V1065_U.book Page 50 Tuesday, March 31, 2009 6:42 PM Editing surround decoders/sound field programs Setting sound field parameters Although the field sound programs would satisfy you as they are with the default parameters, you can arrange sound effect or decoders suitable for acoustical conditions of sources or rooms by setting the parameters. Sound field parameters y • The default settings are marked with “*”.
01EN_00_RX-V1065_U.book Page 51 Tuesday, March 31, 2009 6:42 PM Editing surround decoders/sound field programs Note Source sound • This setting is available only when “Extra Speaker Assignment” is set to “Presence” (page 56). Early ■ Parameters for adjusting early-reflected sound Level Level INTRODUCTION Sound field parameters for advanced configurations Time Time Sound source Initial Delay / P. Initial Delay / Sur. Initial Delay / Sur.
01EN_00_RX-V1065_U.book Page 52 Tuesday, March 31, 2009 6:42 PM Editing surround decoders/sound field programs Parameters for adjusting reverberant sound Reverb Level Adjustable range: 0 to100% Reverb Time Adjustable range: 1.0 to 5.0s Reverb Time parameter adjusts the attenuation time of the rear reverberant sound based on the time that about 1kHz reverberant sound takes for 60dB of attenuation. Reverberant sound attenuates faster as you decrease the value.
01EN_00_RX-V1065_U.book Page 53 Tuesday, March 31, 2009 6:42 PM Editing surround decoders/sound field programs ■ Parameter for Straight Enhancer and 7ch Enhancer Effect Level High*, Low INTRODUCTION Choices: Adjusts the Compressed Music Enhancer effect level. When the high-frequency signals of the source is emphasized too much, set the effect level to “Low”. To reduce the effect, set this parameter to “Low”.
01EN_00_RX-V1065_U.book Page 54 Tuesday, March 31, 2009 6:42 PM Operating various settings for this unit (Setup menu) You can call the Setup menu using the remote control and change the settings of various menus. For details, read “Basic operation of the Setup menu” first, and see the respective pages. Menu/Submenu Function Page Sets items for speakers. 55 Auto Setup (YPAO) Automatically adjusts output characteristics of speakers.
01EN_00_RX-V1065_U.book Page 55 Tuesday, March 31, 2009 6:42 PM Operating various settings for this unit (Setup menu) Menu/Submenu Function Page DSP Parameter Sets parameters for the sound field programs. 60 Memory Guard Protects some settings against accidental alteration. 60 5 The Setup menu screen appears on both the GUI screen and front panel display. GUI screen PREPARATION Setup Menu Press jCursor k / n to select an item to edit and then press jCursor l / h to change the setting.
01EN_00_RX-V1065_U.book Page 56 Tuesday, March 31, 2009 6:42 PM Operating various settings for this unit (Setup menu) y Note • The speaker configuration includes items for defining a speaker size: “Large” or “Small”. “Large” and “Small” refer to speakers with woofer diameters 16 cm or larger and smaller than 16 cm, respectively. • If “LFE / Bass Out” is set to “Front”, “Front Speaker” automatically switches to “Large” even when it is set to “Small”.
01EN_00_RX-V1065_U.book Page 57 Tuesday, March 31, 2009 6:42 PM Operating various settings for this unit (Setup menu) Bass Crossover Frequency Choices: 40Hz, 60Hz, 80Hz*, 90Hz, 100Hz, 110Hz, 120Hz, 160Hz, 200Hz Subwoofer Phase Normal*, Reverse Sets the phase of your subwoofer if bass sounds are lacking or unclear. Normal Reverse Speaker Level Adjustable range: –10.0dB to +10.0dB (0.5dB step) Defaults: 0dB (FR.L, FR.R, SWFR, PR.L, PR.R) –1.0dB (CNTR, SUR.L, SUR.
01EN_00_RX-V1065_U.book Page 58 Tuesday, March 31, 2009 6:42 PM Operating various settings for this unit (Setup menu) Max Outputs sound without adjusting the dynamic range of the input signals. ■ Lipsync Adjusts delay between video output and audio output. HDMI Auto Lipsync Choices: Off*, On Automatically adjusts output timing of audio and video signals when a TV that supports an automatic lip-sync function is connected to this unit.
01EN_00_RX-V1065_U.book Page 59 Tuesday, March 31, 2009 6:42 PM Operating various settings for this unit (Setup menu) Through*, 16:9, Smart Zoom Through ■ Adaptive DRC Choices: Notes You can set items for a video monitor and the front panel display. Auto Off Auto Input level Volume : low Auto Off Off Input level Volume : high Adjusts the dynamic range automatically. Not adjust the dynamic range automatically.
01EN_00_RX-V1065_U.book Page 60 Tuesday, March 31, 2009 6:42 PM Operating various settings for this unit (Setup menu) Input Rename DSP Parameter Changes input source names to be displayed on the front panel display. Selecting a name to be displayed from templates Press jCursor k / n to select the input source name to edit and then press jCursor l / h to select a new name from the following templates.
01EN_00_RX-V1065_U.book Page 61 Tuesday, March 31, 2009 6:42 PM Using multi-zone configuration Only analog signal can be sent to the second zone. If you want to output sounds to Zone2, connect an external component to the AV5-6, AUDIO1-2 or VIDEO AUX (AUDIO) jacks (by analog connection). For example, if you want to output sound from an HDMI DVD player to the second zone, you must connect the HDMI DVD player to this unit by both HDMI and analog connections.
01EN_00_RX-V1065_U.book Page 62 Tuesday, March 31, 2009 6:42 PM Using multi-zone configuration Controlling Zone2 You can select and control Zone2 by using the control keys on the front panel or on the remote control. The available operations are as follows: • Selecting the input source. • Tuning into the desired station (when “TUNER” is selected as the input source) • Tuning into the desired channel (when “XM” or “SIRIUS” is selected as the input source) (U.S.A.
01EN_00_RX-V1065_U.book Page 63 Tuesday, March 31, 2009 6:42 PM Controlling other components with the remote control You can control external components for a selected input source with the remote control. The keys available for controlling external components are as follows: Input source jCursor, ENTER, RETURN Operates the menus of external components. kExternal component operation keys Function as a recording or playback key of an external component, or a menu display key.
01EN_00_RX-V1065_U.book Page 64 Tuesday, March 31, 2009 6:42 PM Advanced setup In the advanced setup menu, you can set basic operations of this unit, such as on and off of a bi-amp connection, or initialize user settings. 1 Set this unit to standby. 2 While holding down OSTRAIGHT on the front panel, press KMAIN ZONE ON/OFF. Keep holding down OSTRAIGHT until “ADVANCED SETUP” appears on the front panel display. ADVANCED SETUP 3 Rotate the NPROGRAM selector to select the parameter you want to change.
01EN_00_RX-V1065_U.book Page 65 Tuesday, March 31, 2009 6:42 PM Advanced setup 3 INTRODUCTION Enter the desired remote control ID code. To switch to ID1: Press lNumeric keys to enter “5019”. To switch to ID2: Press lNumeric keys to enter “5020”. Once the remote control code is registered, nTRANSMIT blinks twice. If it fails, nTRANSMIT blinks six times. Repeat from step 1. y PREPARATION • If you initialize the settings of this unit, “REMOTE ID” (remote control code of this unit) is set to “ID1”.
01EN_00_RX-V1065_U.book Page 66 Tuesday, March 31, 2009 6:42 PM APPENDIX Troubleshooting Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. General Problem See page Cause Remedy This unit does not operate properly.
01EN_00_RX-V1065_U.book Page 67 Tuesday, March 31, 2009 6:42 PM Troubleshooting Problem Cause Remedy See page No appropriate input source has been selected. Rotate the RINPUT selector (or press dInput selection key) to select the desired input source. 22 Speaker connections are not secure. Secure the connections. 11 The volume is turned down or muted. Turn up the volume. 22 Signals this unit cannot reproduce are being input from a source component, such as a CD-ROM.
01EN_00_RX-V1065_U.book Page 68 Tuesday, March 31, 2009 6:42 PM Troubleshooting Problem No sound is heard from the subwoofer. Cause Remedy See page “LFE / Bass Out” is set to “Front” and a Dolby Digital, DTS or AAC signals is being played. Set “LFE / Bass Out” to “Subwoofer” or “Both”. 56 “LFE / Bass Out” is set to “Subwoofer” or “Front” and a 2-channel source is being played. Set “LFE / Bass Out” to “Both”. 56 The source does not contain low frequency signals.
01EN_00_RX-V1065_U.book Page 69 Tuesday, March 31, 2009 6:42 PM Troubleshooting HDMI™ No picture or sound. Cause Remedy See page The number of the connected HDMI components is over the limit. Disconnect some of the HDMI components. — The connected HDMI component does not support high-bandwidth digital copyright protection (HDCP). Connect an HDMI component that supports HDCP. 81 Problem Cause FM stereo reception is noisy. Check the antenna connections.
01EN_00_RX-V1065_U.book Page 70 Tuesday, March 31, 2009 6:42 PM Troubleshooting Problem Cause This unit cannot select other audio programs than the main program. The radio station provides one audio program only. HD Radio information does not appear. The radio station does not provide the information. Remedy See page Remedy See page iTunes Tagging (U.S.A. model only) Problem Tag data cannot be transferred to your iPod when it is station in the Yamaha iPod universal dock (YDS10).
01EN_00_RX-V1065_U.book Page 71 Tuesday, March 31, 2009 6:42 PM Troubleshooting Status message Cause Remedy See page The XM Mini-Tuner is acquiring audio or program information from the XM satellite signal. This message can also occur in weak XM signal conditions. Note that this unit may not respond to some operations while this message is displayed. This message should disappear in a few seconds in good signal conditions.
01EN_00_RX-V1065_U.book Page 72 Tuesday, March 31, 2009 6:42 PM Troubleshooting SIRIUS Satellite Radio (U.S.A. model only) If an operation takes longer than usual or an error occurs, one of the following messages may appear on the GUI screen. In this case, read the cause and follow the corresponding remedies. Status message Cause Remedy See page ANTENNA ERROR The antenna is not connected to the SiriusConnect tuner properly. Check the connection of the antenna and SiriusConnect tuner.
01EN_00_RX-V1065_U.book Page 73 Tuesday, March 31, 2009 6:42 PM Troubleshooting Remote control The remote control does not work or function properly. Cause Remedy See page Direct sunlight or lighting (from an inverter type of fluorescent lamp, strobe light, etc.) is striking the remote control sensor of this unit. Adjust the lighting angle or reposition this unit. — The batteries are weak. Replace all batteries. 9 The remote control ID of the remote control and this unit do not match.
01EN_00_RX-V1065_U.book Page 74 Tuesday, March 31, 2009 6:42 PM Troubleshooting Status message Cause Disconnected Your iPod is removed from the Yamaha iPod universal dock. Unable to play This unit cannot play back the songs currently stored on your iPod. Remedy See page 42 Check that the songs currently stored on your iPod are playable. — Bluetooth™ Status message Searching...
01EN_00_RX-V1065_U.book Page 75 Tuesday, March 31, 2009 6:42 PM Troubleshooting Status message Cause Remedy See page USB Connected Your USB storage device is connected. Disconnected Your USB storage device has been disconnected from the USB port of this unit. Check the connection between this unit and your USB storage device. — This unit recognizes the USB storage device as an illegal device. Turn this unit off and then turn on again. 18 This unit cannot access your USB storage device.
01EN_00_RX-V1065_U.book Page 76 Tuesday, March 31, 2009 6:42 PM Troubleshooting Error message Cause Remedy See page E-7:NO MIC The optimizer microphone was unplugged during the “Auto Setup” procedure. Do not touch the optimizer microphone during “Auto Setup”. 19 E-8:NO SIGNAL The optimizer microphone does not detect test tones. Check whether the microphone is properly placed. 19 Check whether the speakers are properly placed and connected.
01EN_00_RX-V1065_U.book Page 77 Tuesday, March 31, 2009 6:42 PM Glossary ■ Audio and video synchronization (lip sync) ■ Dolby Digital Surround EX Dolby Digital EX creates 6 full-bandwidth output channels from 5.1channel sources. For the best results, Dolby Digital EX should be used with movie sound tracks recorded with Dolby Digital Surround EX. With this additional channel, you can experience more dynamic and realistic moving sound especially with scenes with “fly-over” and “flyaround” effects.
01EN_00_RX-V1065_U.book Page 78 Tuesday, March 31, 2009 6:42 PM Glossary ■ DSD Direct Stream Digital (DSD) technology stores audio signals on digital storage media, such as Super Audio CDs. Using DSD, signals are stored as single bit values at a high-frequency sampling rate of 2.8224 MHz, while noise shaping and oversampling are used to reduce distortion, a common occurrence with very high quantization of audio signals.
01EN_00_RX-V1065_U.book Page 79 Tuesday, March 31, 2009 6:42 PM Glossary ■ “x.v.Color” INTRODUCTION A color space standard supported by HDMI version 1.3. It is a more extensive color space than sRGB, and allows the expression of colors that could not be expressed before. While remaining compatible with the color gamut of sRGB standards, “x.v.Color” expands the color space and can thus produce more vivid, natural images. It is particularly effective for still pictures and computer graphics.
01EN_00_RX-V1065_U.book Page 80 Tuesday, March 31, 2009 6:42 PM Sound field program information ■ Elements of a sound field What really creates the rich, full tones of a live instrument are the multiple reflections from the walls of the room. In addition to making the sound live, these reflections enable us to tell where the player is situated as well as the size and shape of the room in which we are sitting.
01EN_00_RX-V1065_U.book Page 81 Tuesday, March 31, 2009 6:42 PM Information on HDMI™ ■ HDMI signal compatibility Audio signals Audio signal formats INTRODUCTION Audio signal types Compatible media 2ch, 32 to 192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio, etc. Multi-ch Linear PCM 8ch, 32 to 192 kHz, 16/20/24 bit DVD-Audio, Blu-ray Disc, HD DVD, etc. DSD 2/5.1ch, 2.8224 MHz, 1 bit SA-CD, etc. Bitstream Dolby Digital, DTS DVD-Video, etc.
01EN_00_RX-V1065_U.book Page 82 Tuesday, March 31, 2009 6:42 PM Specifications AUDIO SECTION VIDEO SECTION • Minimum RMS Output Power for Front, Center, Surround, Surround back 20 Hz to 20 kHz, 0.08% THD, 8 Ω...................................... 105 W • Dynamic Power (IHF) Front Speakers 8/6/4/2 Ω ................................ 140/175/205/250 W • Maximum Useful Output Power (JEITA) [General, China, Korea and Asia models] 1 kHz, 10% THD, 8 Ω .........................................................
01EN_00_RX-V1065_U.book Page 83 Tuesday, March 31, 2009 6:42 PM Index ■ Numerics ■ A C ■ F FIRM UPDATE, advanced setup .................. 64 Firmware update ............................................ 64 FM antenna connection .................................. 18 FM tuning ...................................................... 29 FM/AM (CATEGORY l / h), front panel ................................................... 4 Frequency tuning ...........................................
01EN_00_RX-V1065_U.book Page 84 Tuesday, March 31, 2009 6:42 PM Index Multi-zone configuration ............................... 61 Music Video, sound field program ................ 26 MUTE indicator, front panel display ............... 6 MUTE, remote control .................................... 7 ■ N Neo:6 Cinema, decoder ................................. 27 Neo:6 Music, decoder .................................... 27 Neural Sur., decoder ......................................
01EN_00_RX-V1065_U.book Page 85 Tuesday, March 31, 2009 6:42 PM Index INTRODUCTION PREPARATION BASIC OPERATION ADVANCED OPERATION APPENDIX English “KMAIN ZONE ON/OFF” or “pPOWER” (example) indicates the name of the parts on the front panel or the remote control. Refer to “Part names and functions” on page 4. 85 En Black process 45.0° 240.
01EN_00_RX-V1065_U.book Page i Tuesday, March 31, 2009 6:42 PM List of remote control codes TV A.R.
01EN_00_RX-V1065_U.
01EN_00_RX-V1065_U.
01EN_00_RX-V1065_U.
01EN_00_RX-V1065_U.
01EN_00_RX-V1065_U.
01EN_00_RX-V1065_U.
01EN_00_RX-V1065_U.
01EN_00_RX-V1065_U.
01EN_00_RX-V1065_U.book Page x Tuesday, March 31, 2009 6:42 PM Black process 45.0° 240.
