DISHWASHER DA 6141 152977 37/1 INSTRUCTION BOOKLET UK
Description of the appliance 1. Water hardness adjustment 2. Levelling spacers 3. Upper basket stop 1 4. Salt container 2 5. Large filter 6. Detergent dispenser 7. Control panel 8. Rating plate 9. Rinse aid dispenser 14 3 13 12 11 4 10 5 10. Central filter 6 9 11. Lower spray arm 12. Upper spray arm 8 13. Upper basket 7 14. Worktop IN68 The control panel 1 2 3 4 1. ON/OFF indicator light 2. ON/OFF push button 3. Programme guide 4. Door handle 5. Programme marker 6.
Washing programmes Programme * INTENSIVE Normal soil Crockery and cutlery NORMAL WASH Light soil Crockery and cutlery ** * Degree of soil and type of load Starting Require position of the push button programme selector On/Off A Recommended quantity of detergent Wash 25 g Cycle description Prewash 5g Cold prewash Main wash up to 65°C 1 cold rinse 1 hot rinse Drying B On/Off 30 g / Main wash up to 65°C 1 cold rinse 1 hot rinse Drying 30 g / Main wash up to 65°C 1 cold rinse 1 hot rins
Operating sequence 1. Check the filters 9. At the end of the washing programme Ensure they are clean and properly positioned (see "Maintenance and cleaning"). At the end of the programme the dishwasher will automatically stop. The On/Off indicator light remains on until the On/Off push button is depressed. 2. Check that there is rinse aid and salt 10. Switch off the dishwasher Switch off the dishwasher by pressing the On/Off push button. 3. Load the dishes Remove any scraps of food.
Using your appliance Loading your appliance Before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. Do not load very small items which can fall through the baskets. The lower basket The lower basket is designed to take saucepans, lids, plates, salad bowls, cutlery etc. Serving dishes and large lids should be arranged around the edge of the basket, ensuring that the upper spray arm can turn freely.
The upper basket The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 25 cm in diameter), salad bowls, cups and glasses. Arrange items so that water can reach all surfaces. Light items (plastic bowls etc.) should be loaded in the upper basket and arranged so they do not move. In case that plates are loaded in the upper basket: US64 load them starting from the rear positions of the basket; tilting them slightly forwards and avoiding the front positions near the door.
Fitting under a counter (kitchen worktop or sink) By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture. Proceed as follows: - - 600 820 570 Remove the machine’s worktop by unscrewing the two rear retaining screws, pull from the front and slide out the rear slots, lifting the worktop. 600 Insert the machine after adjusting height and levelling with the adjustable feet.
Instruction Book - Before use - Maintenance - Installation DISHWASHER Contents Important safety information 2 Before use Setting the water softener Filling with salt Filling with rinse aid and adjusting the dose Use of detergent 3 3 4 5 6 Hints and tips 7 Maintenance and cleaning Internal cleaning Cleaning the filters External cleaning Prolonged periods of non-operation Frost precautions Moving the machine 8 8 8 8 8 8 8 Something not working 9 Installation Water supply connections Water outlet c
Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of your safety.
Before use Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with salt 5. Fill the rinse aid dispenser. 6. Run a "Rinse and Hold" programme.
Filling with salt Attention! Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting a washing programme. This will prevent any grains of salt or salty water, which may have been spilled, remaining on the bottom of the machine, which may cause corrosion. SR15 1. Unscrew the cap of the salt container.
Rinse aid Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting. Filling with rinse aid 1. Open the container by turning the lid (A) anticlockwise. 2. Add the rinse aid until the container is completely full. The indicator (B) will be completely dark. A 3.
Use of detergent Only use detergents specifically designed for use in dishwashers. We recommend the use of Finish detergents which are available in the following options: Min = 15 g Max = 30 g D Finish Double Action Tablets. Each tablet has the exact amount of detergent required, simply place in the dispenser. Finish Powder recommended for every day use. Finish Liquid Gel ideal for every day use. As the gel is extra gentle is it recommended for fine bone china.
Hints and tips To save energy Items not suitable for dishwashers Place dishes in the machine immediately after every meal and wait until the dishwasher is full before washing. The following items should not be washed in the dishwasher (unless they are sold as dishwasher proof): If necessary run the Rinse and Hold programme (see "Washing Programmes" chart) so that any food scraps do not become caked on the dishes while you are waiting to run the complete wash programme.
Maintenance and cleaning Internal cleaning Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend the use of Finish Dishwasher Cleaner every 3 months or run a 65°C wash without dishes using detergent. Regular use of Finish Dishwasher Cleaner cleans inaccessible parts, eliminates unpleasant food odours and helps prevent the build-up of limescale.
Something not working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below. Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a charge will be made even if the appliance is in guarantee.
Installation Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. Levelling Good levelling is essential for correct closure and sealing of the door.
CS10 Electrical connection This appliance must be earthed. The manufacturer declines any responsibility should this safety measure not be observed. If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted.
2 07/01
Guarantee conditions Service and spare parts Standard guarantee conditions In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Zanussi Service Centre by telephoning: We, Zanussi, undertake that if within 24 months of the date of purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials
To contact your local Service Force Centre telephone 08705 CHANNEL ISLANDS GUERNSEY Guernsey Electricity PO Box 4 Vale, Guernsey Channel Islands GY1 3AD JERSEY Jersey Electricity Company Haut De L’orme Rue De Haut De L’orme Trinity Jersey Channel Islands JE3 5FG ISLE OF LEWIS KELSO ND Macleod 16 James Street Stornoway Isle of Lewis PA87 2QW NORTH EAST GATESHEAD Unit 356a Dukesway Court Dukesway Gateshead NE11 0BH GRIMSBY 7 King Street Kirkwall Orkney KW15 1JF 15 Hainton Avenue Grimsby N. E.
To contact your local Service Force Centre telephone 08705 MIDLANDS 929 929 LONDON & EAST ANGLIA SOUTH EAST BIRMINGHAM 66 Birch Road East Wyrley Trading Estate Witton Birmingham B6 7DB BECKENHAM CHELMSFORD BOURNE BRIDGNORTH GLOUCESTER HEREFORD HIGHAM FERRERS Pinfold Road Bourne PE10 9HT 68 St.
Guarantee conditions Service and spare parts Standard guarantee conditions In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Zanussi Service Centre by telephoning: We, Zanussi, undertake that if within 12 months of the date of purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials
From the Electrolux Group. The world’s No.1 choice. The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. 14 billion USD in more than 150 countries around the world.
