User manual

Clean the glass panel with water and soap. Dry the
glass panel carefully.
Installing the door and the glass panel
When you install the panel with a decorative frame,
make sure that the screen-printing zone looks to the in-
ner side of the door. Make sure that after the installa-
tion the surface of the glass panel frame on the screen-
printing zones is not rough when you touch it.
Make sure that you install the internal panel of glass in
the seats correctly (refer to the illustration).
What to do if…
Warning! Refer to the Safety chapters.
Problem Possible cause Remedy
The appliance does not heat up. The appliance is deactivated. Activate the appliance. Refer to
"Daily use".
The appliance does not heat up. The fuse in the fuse box is re-
leased.
Do a check of the fuse. If the fuse is
released more than one time, con-
tact a qualified electrician.
The oven lamp does not operate. The oven lamp is defective. Replace the oven lamp.
Steam and condensation settle on
the food and in the appliance.
You left the dish in the appliance for
too long.
Do not let the dishes stay in the ap-
pliance for more than 15-20 mi-
nutes after the cooking ends.
If you cannot find a solution to the problem yourself,
contact your dealer or the service centre.
The necessary data for the service centre is on the rat-
ing plate. The rating plate is on the front frame of the
appliance cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
Technical data
Voltage 230 V
Frequency 50 Hz
Installation
Warning! Refer to the Safety chapters.
23