User manual

OptiHeat Control (3 step Residual heat indicator)
Warning! / / There is a risk of
burns from residual heat. The indicators
show the level of the residual heat for the
cooking zones you are currently using.
The indicators may also come on for the
neighbouring cooking zones even if you
are not using them.
Daily use
Warning! Refer to Safety chapters.
Activating and deactivating
Touch for 1 second to activate or deactivate the
hob.
Automatic Switch Off
The function deactivates the hob automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after you activate the
hob,
• you spill something or put something on the control
panel for more than 10 seconds (a pan, a cloth,
etc.). An acoustic signal sounds and the hob
deactivates. Remove the object or clean the control
panel.
• you do not deactivate a cooking zone or change the
heat setting. After some time comes on and the
hob deactivates.
The relation between the heat setting and the time
after which the hob deactivates:
Heat setting The hob deactivates af-
ter
, 1 - 3
6 hours
4 - 7 5 hours
8 - 9 4 hours
10 - 14 1.5 hour
The heat setting
To set or change the heat setting:
Touch the control bar at the correct heat setting or move
your finger along the control bar until you reach the
correct heat setting.
Activating and deactivating the outer rings
You can adjust the surface you cook to the dimension of
the cookware.
Use sensor field:
To activate the outer ring: touch the sensor field. The
indicator comes on.
To deactivate the outer ring: touch the sensor field
until the indicator goes out.
Automatic Heat Up
Activate this function to get a desired heat setting in a
shorter time. When it is on, the zone operates on the
highest setting in the beginning and then continues to
cook at the desired heating setting.
To activate the function the cooking zone
must be cold.
To activate the function for a cooking zone: touch
( comes on). Immediately touch a desired heat
setting. After 3 seconds comes on.
To deactivate the function: change the heat setting.
Timer
Count Down Timer
You can use this function to set how long the cooking
zone should operate for a single cooking session.
First set the heat setting for the cooking zone then set
the function.
8