User manual

• the hob gets too hot (e.g. when a saucepan boils
dry). Let the cooking zone cool down before you use
the hob again.
• you use incorrect cookware. The symbol comes
on and the cooking zone deactivates automatically
after 2 minutes.
• you do not deactivate a cooking zone or change the
heat setting. After some time comes on and the
hob deactivates.
The relation between the heat setting and the time
after which the hob deactivates:
Heat setting The hob deactivates af-
ter
, 1 - 2
6 hours
3 - 4 5 hours
5 4 hours
6 - 9 1.5 hour
The heat setting
Touch to increase the heat setting. Touch to
decrease the heat setting. Touch and at the
same time to deactivate the cooking zone.
Automatic Heat Up
If you activate this function you can get a necessary
heat setting in a shorter time. The function sets the
highest heat setting for some time and then decreases
to the correct heat setting.
To activate the function the cooking zone
must be cold.
To activate the function for a cooking zone: touch
( comes on). Immediately touch ( comes
on). Immediately touch until the correct heat setting
comes on. After 3 seconds comes on.
To deactivate the function: touch .
Power function
This function makes more power available to the
induction cooking zones. The function can be activated
for the induction cooking zone only for a limited period
of time. After this time the induction cooking zone
automatically sets back to the highest heat setting.
Refer to “Technical information” chapter.
To activate the function for a cooking zone: touch
. comes on.
To deactivate the function: touch
or .
Timer
Count Down Timer
You can use this function to set how long the cooking
zone should operate for a single cooking session.
First set the cooking zone then set the function. You
can set the heat setting before or after you set the
function.
To set the cooking zone: touch
again and again
until the indicator of a necessary cooking zone comes
on.
To activate the function or change the time: touch
or of the timer to set the time (00 - 99 minutes).
When the indicator of the cooking zone starts to flash
slowly the time counts down.
To see the remaining time: set the cooking zone with
. The indicator of the cooking zone starts to flash
quickly. The display shows the remaining time.
To deactivate the function: set the cooking zone with
and touch . The remaining time counts back to
00. The indicator of the cooking zone goes out.
When the time comes to an end, the
sound operates and 00 flashes. The
cooking zone deactivates.
To stop the sound: touch .
Minute Minder
You can use this function as a Minute Minder when the
hob is activated and the cooking zones do not operate
(the heat setting display shows ).
To activate the function: touch . Touch or
of the timer to set the time. When the time comes to an
end, the sound operates and 00 flashes.
To stop the sound: touch .
The function has no effect on the
operation of the cooking zones.
22