Installation Guide

ManualsBrandsZ-Lite ManualsLighting & FansWarwick 8.5-in W Chrome Ceiling Flush Mount

ASSEMBLY

ASSEMBLY AND

AND

AND INSTALLATION

INSTALLATION

INSTRUCTIONS

INSTRUCTIONS FOR

FOR

ITEM

ITEM #

# 136F/

136F/

136F/ #

# 137F/#

137F/#

137F/# 140F

140F

NOTE

Should any difficulty be experienced, please consult a qualified electrician

before installing.

TO A VOID

A VOID

A VOID RISK

RISK

RISK OF

OF ELECTRICAL

ELECTRICAL

ELECTRICAL SHOCK,

SHOCK,

SHOCK, BE

BE SURE

SURE

SURE TO

TO SHUT

SHUT

OFF

OFF POWER

POWER

POWER WHILE

WHILE

WHILE INSTALLING

INSTALLING

INSTALLING OR

OR SERVICING

SERVICING

SERVICING THIS

THIS

THIS FIXTURE.

FIXTURE.

WARNING

INSTALLATION

INSTALLATION STEP:

STEP:

1. Turn off the electricity at the Fuse or Circuit Breaker

before installation.

2. Attach the Cross Bar to the Outlet Box by the 2pcs

Mounting Short Screws upwards.

3. Make wire connection with Wire Connectors:

---- Connect the black Wire from the light

to the Black Wire from the Outlet Box.

---- Connect the white Wire from the light to the

White Wire from the Outlet Box.

---- Attached the Ground Wire and House Ground Wire

to the Cross Bar with a Green Screw.

Carefully tuck wires back into the Outlet Box.

4. Install Bulbs. (Bulbs are not included, please do

not exceed the maximum capacity which is

recommended on the Socket Cover.)

5. Raise up the fixture and insert the 2pcs of Long Mounting Screws into the Canopy and tighten

with the Fixing Nuts.

6. Attached the Washer ,Plastic Washer to the Nipple and the attached the Glass to fixture through

the nipple, and then fixing the glass with End Cap and Finial.

7. Turn on the power at Fuse or Circuit Box and enjoy your new fixture.