User's Manual

SSID: The SSID is the name shared among all points in a wireless network. The SSID must be
identical for all points in the wireless network. It is case sensitive and must not exceed 32
characters, which may be any keyboard character. Make sure this setting is the same for all
points in your wireless network.
Channel: Select the appropriate channel from the list provided to correspond with your
network settings.
Turbo Mode: When you enable the Turbo Mode, the maximum data rate can up to 72 mbps.
Date Rate: The basic transfer rates should be set depending on the speed of your wireless
network Specifies rate of data transmission. Select the desired rate from the drop-down menu.
The best selection will adapt the rate to the best available.
Outdoor Channels: Enable the AP to interface with STAs using those specific frequencies
which are allowed for outdoor use.
Click the Reboot button for changes to take effect. After you click Reboot button, the web
server will lose connectivity with the AP Web Server as the AP reboots. To reestablish the
connection with the AP Web Server, please wait until the AP has completed rebooting and
navigate to the Web Server to resume communication.
Password
Here allow you to change the Access Point’s password. Changing the password for the Access
Point is as easy as typing the password into the New Password field. Then, type it again into
the Retype new password field to confirm. Click the Apply button to save the setting.