Model No.: Retractable ceiling fan with lights Ceiling Fan Installation Instructions THANK YOU We appreciate the trust and confidence you have placed in YUHAO through the purchase of this ceiling fan.We strive to continually create quality products designed to enhance your home.Vis sit us online to see our full line of products available for your home improvement needs.
Table of contents Table of contents 1 Safety Precautions 2 Warranty 3 Pre-Installation Tools needed 3 Installation kit 4 Blade balancing kit 4 Specification 5 Installation Step 1(Basic assembly of the fan) 6 Step 2 (Ceiling bracket installation ) 8 Step 3 (Receiver and wiring installation) 9 Step 4 (Light cover installation) 10 Step 5(Switch on and ceiling fan works) 10 Remote Control ( Emitter ) Operation 11 TroubleShooting 12 Balancing 13 .1. Visit www.pmwfan.
Safety Precautions The information contained in the following pages has been prepared to ensure your maximum enjoyment of your fan Please remove the fuse or turn off the circuit breaker to cut off the power before installing the fan. Ensure all electrical connections are in compliance with local laws, regulations and national eletrical codes. If you are not familiar with electrical installation and wiring, please hire a qualified electrician or consult the wiring manual. 1.
Warranty The manufacturer warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of lifetime after the date of purchase by the original purchaser. The manufacturer warrants the light kit (excluding any glass), to be free from defects in workmanship and material at the time of shipment from the factory for a period of three years after the date of purchase by the original purchaser.
Pre-Installation Installation kit AA Part AA BB CC BB CC Description Wire nut Screws A Screws B Quantity 5 5 2 Blade balancing kit .4. Visit www.pmwfan.com for further assistance.
Pre-Installation Specification A F G H B I C J D Part K AAA 1.5V E Quantity Part A Bracket 1 I Receptor 1 B Down rod 1 J Remote control 1 C Canopy 1 K Battery 2 D Yoke cover Light cover 1 E F Blades 3 G H Body/motor Light kit 1 1 Description Description 1 .5. Visit www.pmwfan.com for further assistance.
Installation Step 1(Basic assembly of the fan) ① Install the Yoke cover and Canopy. Then insert the fixing pin, push the Hanging ball up, and fix it with screws. ② Pass the cable through the down rod and lock the down rod. screw .6. Visit www.pmwfan.com for further assistance.
Installation ③ Install the Yoke cover and Canopy. Then insert the fixing pin, push the Hanging ball up, and fix it with screws. ④ OK .7. Visit www.pmwfan.com for further assistance.
Installation Step 2 (Ceiling bracket installation and fan into the installed Bracket.) ① Turn off the fan power supply at the circuit breaker box and the wall switch. OFF ② Can be installed on <15º sloped roof. Choose the following installation methods according to the actual situation of the roof. ACCEPTABLE FOR FAN SUPPORT Electrical Outlet Box or Solid wood roof .8. Visit www.pmwfan.com for further assistance.
Installation ③ Snap the basically assembled fan into the installed Bracket. Click! buckle FAN Step 3 (Receiver and wiring installation) ① Connect the wires according to the polarity (the color of the House power cord may be different if the color is the same). AC IN L(Black) AC IN N(White) L For light(Blue) N Neutral(White) ② House Power To Motor U(Pink) V(Gray) W(Red) Ground(Green) Put the receiver into the Bracket and arrange the wires ③ Adjust the position Canopy, then lock it .9.
Installation Step 4 ( Light cover installation) Step 5(Switch on and ceiling fan works) ON .10. Visit www.pmwfan.com for further assistance.
Remote Control ( Emitter ) Operation If emitter can not control the fan ① 1. Please check whether the battery is installed correctly and whether it is charged. If necessary, replace the remote control battery. 2. Please check if there are similar remote control products working nearby, because remote control products of the same frequency will interfere with each other. 3.
TroubleShooting WARNING: Make sure the power is off at the electrical panel box before you attempt any repairs. Refer to step 7 “Making the electrical connections” on page 13. Problem The fan will not start. The fan sounds noisy. The remote control is not working. Solution □ Check the main and branch circuit fuses or breakers. □ Check the line wire connections to the fan and switch wire connections in the switch housing.
Balancing – Wobbling problems during fan operation If the fan body wobbles during its operation, this is not a sign of malfunctioning (even if it wobbles a few centimeters). To reduce wobbling, you can turn off the fan,and: 1.Check that all blades are properly fastened by tightening their screws. 2.Check the distance between each blade and the ceiling. Measurements to the ceiling can be carried out as shown in the following diagram.
Questions, problems, missing parts? Before returning to the store, visit www.pmwfan.com for further assistance. Retain this manual for future use.