Model No:8554 Ceiling Fan Installation Instructions THANK YOU We appreciate the trust and confidence you have placed in us through the purchase of this ceiling fan.We strive to continually create quality products designed to enhance your home.
Table of contents Table of contents 1 Safety Precautions 2 Warranty 3 Pre-Installation Tools needed 3 Installation kit 4 Blade balancing kit 4 Specification 5 Installation Step 1(Basic assembly of the fan) 6 Step 2 (Ceiling bracket installation ) 8 Step 3 (Receiver and wiring installation) 9 Step 4 (blades installation) 10 Step 5(Switch on and ceiling fan works) 11 Remote Control ( Emitter ) Operation 12 TroubleShooting 13 Balancing 14 .1. Visit www.pmwfan.
Safety Precautions The information contained in the following pages has been prepared to ensure your maximum enjoyment of your fan Please remove the fuse or turn off the circuit breaker to cut off the power before installing the fan. Ensure all electrical connections are in compliance with local laws, regulations and national eletrical codes. If you are not familiar with electrical installation and wiring, please hire a qualified electrician or consult the wiring manual. 1.
Warranty The manufacturer warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of lifetime after the date of purchase by the original purchaser. The manufacturer warrants the light kit (excluding any glass), to be free from defects in workmanship and material at the time of shipment from the factory for a period of three years after the date of purchase by the original purchaser.
Pre-Installation Installation kit AA Part AA BB CC DD BB CC Description Blade attachment screw with lock washer Wire nut Screws A Screws B Blade balancing kit .4.
Pre-Installation Specification A E B F C Z Z Z AAA 1.5V D Part Description G Quantity Part I A Bracket 1 B Down rod 1 C Canopy 1 D Yoke cover 1 E Body/motor 1 F Blades 3 G H Receptor 1 1 Remote control H .5.
Installation Step 1(Basic assembly of the fan) ① Decompose Drown rod Hanging Ball fixing pin fastening pin with cap ② Down rod R-shaped circlip Pass the cable through the down rod and lock the down rod. screw .6.
Installation ③ Install in order the yoke cover,Canopy, Hanging Ball on the installed Down rod. slide Hanging Ball down to expose the hole, put the fixing pin into the hole, slide the Hanging Ball up and turn it left and right, let the fixing pin enter the Hanging Ball card slot. ④ OK .7.
Installation Step 2 (Ceiling bracket installation and fan into the installed Bracket.) ① Turn off the fan power supply at the circuit breaker box and the wall switch. OFF ② Can be installed on <10º sloped roof. Choose the following installation methods according to the actual situation of the roof. ACCEPTABLE FOR FAN SUPPORT Electrical Outlet Box or Solid wood roof .8.
Installation ③ Snap the basically assembled fan into the installed Bracket. Click! buckle FAN Step 3 (Receiver and wiring installation) ① Connect the wires according to the polarity (the color of the House power cord may be different if the color is the same). House power AC IN L(Black) AC IN N(White) To Light To Motor FAN ② Put the receiver into the Bracket and arrange the wires .9.
Installation Step 4 (Blades installation) ① ② Align the blades with the mounting holes, and then fix them with screws. OK. .10.
Installation Step 5(Switch on and ceiling fan works) ON Z Z Z .11.
Remote Control ( Emitter ) Operation Remote Control Holder Installation ① Transmitter Function ② 3 2 1 AAA 1.5V ③ 6 4 5 ④ Fan Off Fan Speed (1/2/3/4/5/6) Forward/Reverse Z Z Z ⑤ ⑥ 1H 3H 6H Transmitter learning process LED On/Off Colour Change Sleep Wind Natural Wind Fan Timer Switch (1hr,3hr,6hr) If emitter can not control the fan 1.Insert the 2 pcs of batteries (provided) into transmitter. 2.Turn on the power supply to the fan.
TroubleShooting WARNING: Make sure the power is off at the electrical panel box before you attempt any repairs. Problem The fan will not start. The fan sounds noisy. The remote control is not working. Solution □ Check the main and branch circuit fuses or breakers. □ Check the line wire connections to the fan and switch wire connections in the switch housing. □ Check to make sure the frequency switches from the remote control and receiver are set to the same frequency.
Balancing – Wobbling problems during fan operation If the fan body wobbles during its operation, this is not a sign of malfunctioning (even if it wobbles a few centimeters). To reduce wobbling, you can turn off the fan,and: 1.Check that all blades are properly fastened by tightening their screws. 2.Check the distance between each blade and the ceiling. Measurements to the ceiling can be carried out as shown in the following diagram.
Questions, problems, missing parts? Before returning to the store, visit www.pmwfan.com for further assistance. Retain this manual for future use.