Model No.: 1073L Ceiling Fan Installation Instructions THANK YOU We appreciate the trust and confidence you have placed in us through the purchase of this ceiling fan.We strive to continually create quality products designed to enhance your home.
Table of contents Table of contents 1 Safety Precautions 2 Warranty 3 Pre-Installation Tools needed 3 Installation kit 4 Blade balancing kit 4 Specification 5 Installation Step 1 (Ceiling bracket installation ) 6 Step 2 (Receiver and wiring installation) 7 Step 3 (Light kit installation) 9 Step 5(Switch on and ceiling fan works) 10 Remote Control ( Emitter ) Operation 11 TroubleShooting 12 Balancing 13 .1. Visit www.pmwfan.com for further assistance.
Safety Precautions The information contained in the following pages has been prepared to ensure your maximum enjoyment of your fan Please remove the fuse or turn off the circuit breaker to cut off the power before installing the fan. Ensure all electrical connections are in compliance with local laws, regulations and national eletrical codes. If you are not familiar with electrical installation and wiring, please hire a qualified electrician or consult the wiring manual. 1.
Warranty The manufacturer warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of lifetime after the date of purchase by the original purchaser. The manufacturer warrants the light kit (excluding any glass), to be free from defects in workmanship and material at the time of shipment from the factory for a period of three years after the date of purchase by the original purchaser.
Pre-Installation Installation kit AA Part AA BB CC DD BB CC Description Blade attachment screw with lock washer Wire nut Screws A Screws B Blade balancing kit .4. Visit www.pmwfan.com for further assistance.
Pre-Installation Specification E A (1073-3 L) F B (1073-3 L) G C (1073-3 L) D (1073-3 L) Part A AAA 1.5V Description H Quantity Bracket 1 B Body/motor 1 C Light kit 1 D Light cover 1 E Blades 3 F Receptor 1 G H Remote control Battery 1 2 .5. Visit www.pmwfan.com for further assistance.
Installation Step 1 (Ceiling bracket installation and fan into the installed Bracket.) ① Turn off the fan power supply at the circuit breaker box and the wall switch. ! ② Failure to disconnect the power supply prior to installation may result in serious injury or death. OFF Remove two separated pre-lock screws from Bracket, and loosen the other two (no need to take them out) Remove the screws ③ Choose the following installation methods according to the actual situation of the roof.
Installation Step 2 (Wiring and fan into the installed Bracket.) ① Follow the wiring diagram for wiring. (1073-3 N wiring diagram) House power wire AC IN N(White) AC IN L(Black) Ground wire(Green) To Motor Put the receiver into the Bracket and arrange the wires. (1073-3 L wiring diagram) House power wire AC IN N(White) AC IN L(Black) Ground wire(Green) To light To Motor Put the receiver into the Bracket and arrange the wires. .7. Visit www.pmwfan.com for further assistance.
Installation ② Remove the body from the Bracket hook, lift and rotate the it to make the seven-character slot of the body is hung on the two nails on the Bracket (1073-3 L) ③ Tighten the screws. (1073-3 L) .8. Visit www.pmwfan.com for further assistance.
Installation Step 3 (Blades and Light kit installation) ① Align the connected blade with the mounting hole, and then fix it with screws. (1073-3 L) ② Screw out the 3pc pre-installed screws from motor assembly,connect terminal.Then fix the light kit to the main body with screws.(1073-3 N invalid) Connect terminal Remove the screws .9. Visit www.pmwfan.com for further assistance.
Installation ③ Installation of light cover (1073-3 N invalid) Step 4(Switch on and ceiling fan works) ON .10. Visit www.pmwfan.com for further assistance.
Remote Control ( Emitter ) Operation Transmitter learning process 1.Insert the 2 pcs of batteries (provided) into transmitter. 2.Turn on the power supply to the fan. Within 10 sec, press and hold the “1” and “2” button for about 3 sec. Once the receiver has detected the frequency, receiver will “Beep Beep” twice.Programming process is completed and fan is ready to use. Press and hold for about 3 sec If the fan is not responding to the transmitter, Repeat transmitter learning process.
TroubleShooting WARNING: Make sure the power is off at the electrical panel box before you attempt any repairs. Problem The fan will not start. The fan sounds noisy. The remote control is not working. Solution □ Check the main and branch circuit fuses or breakers. □ Check the line wire connections to the fan and switch wire connections in the switch housing. □ Check to make sure the frequency switches from the remote control and receiver are set to the same frequency.
Balancing – Wobbling problems during fan operation If the fan body wobbles during its operation, this is not a sign of malfunctioning (even if it wobbles a few centimeters). To reduce wobbling, you can turn off the fan,and: 1.Check that all blades are properly fastened by tightening their screws. 2.Check the distance between each blade and the ceiling. Measurements to the ceiling can be carried out as shown in the following diagram.
Questions, problems, missing parts? Before returning to the store, visit www.pmwfan.com for further assistance. Retain this manual for future use.