Installation Guide

INSTALLATION INSTRUCTIONS
VESSEL SINKS
READ FIRST!!!
www.YosemiteHomeDecor.com
1-800-305-9872
Observe all local plumbing and building codes.
Follow these instructions only if it applies to your installation. Vessel sinks allow you to be creative and exible with
your installation.
Before installation, remove your new Copper sink and carefully inspect it for damage. Return the Copper sink to its
packaging until you are ready to install it.
ABOVE COUNTER/ TOPMOUNT INSTALLATION
These instructions contain important care and cleaning instructions. Please review these instructions carefully.
STEP 1:
Carefully set the sink in the outlined drain hole opening.
STEP 2:
To secure the sink on the countertop, use a silicon sealer.
Use moderate force and hand-tighten the drain kit to the sink.
STEP 3:
Install the faucet and drains according to the manufacturer’s instruction manual.
CARE INSTRUCTIONS
Cleaning a copper sink is easy – just wash with a mild soap to prevent water marks or lemon juice to
help lift stains.
Wiping down your sink with a nonabrasive cloth after each use is the best preventative way of keeping
your copper sink free of water spots and corrosive acids. Polishes and waxes are available to help
maintain the color and shine of your new copper sink.
Your copper sink is handmade, we strongly recommend having the
sink on site before cutting your countertop.
** NOTE: Sink model, design, shape, cutout on top, vanity may vary from the picture above.
The diagram is for Instructional purposes only.