Elegance by Haas & Sohn Freestanding Multi-Fuel Stove INSTALLATION, SERVICING AND USER INSTRUCTIONS Models 200 / 210 / 220 / 240 / 250 / 270 / 280 This product is for use only in Great Britain and Ireland (GB, IE) These instructions are to be left with the customer, should be read carefully and kept in a safe place. They will be necessary when servicing the appliance. IMPORTANT Before installation of this product please read these instructions fully.
Contents Welcome to Yeoman 3 Commissioning Data 4 Technical Specification 5 SITE REQUIREMENTS Stove Dimensions Hearth Dimensions Walls adjacent to Hearths 6 7 7 PRE-INSTALLATION CHECKS Flue or Chimney Additional Ventilation 8 9 INSTALLATION INSTRUCTIONS Installing the Stove Commissioning 10 11 OPERATING INSTRUCTIONS General Using the stove for the first time Burning Wood Burning Solid Fuel Ash Removal Recommended Fuels 12 12 12 13 13 14 MAINTENANCE AND SERVICING General Cleaning Cleaning Glass
Welcome to Yeoman Your new Elegance multi-fuel stove is perhaps the most advanced design of modern stoves. Owning such a stove shows appreciation for exceptional quality. IMPORTANT NOTICE If your stove is installed correctly, it will give you many years of excellent service for which it was designed. This appliance must be installed by a HETAS registered installer (GB only).
FOR YOUR RECORDS To assist us in any Guarantee claim please complete the following information:- YEOMAN DEALER APPLIANCE WAS PURCHASED FROM Name: .................................................................................................................................................................................................. Address:.................................................................................................................................................................
TECHNICAL SPECIFICATION Model Elegance 250 Elegance 270 Elegance 280 Flue Draught at Nominal Heat Output Elegance 240 Nominal Heat Output Elegance 220 YM-EL200 YM-EL210 YM-EL220 YM-EL240 YM-EL250 YM-EL270 YM-EL280 Elegance 210 200 210 220 240 250 270 280 Elegance 200 Elegance Elegance Elegance Elegance Elegance Elegance Elegance kW 4.9 4.9 7 4.9 6 6 8 mm Wg 1.5 1.5 1.5 1.5 1.5 1.5 1.5 Inch Wg 0.06 0.06 0.06 0.06 0.06 0.06 0.06 Flue Gas Mass Flow g/s 6.3 6.3 6.3 6.
SITE REQUIREMENTS The Elegance Stove should be fitted by a HETAS (GB only) registered installer, or approved by your local building control officer. Your Yeoman dealer should be able to arrange this service for you. Before installation of this product please read these instructions fully. It is very important to also understand the requirements of the UK Building Regulations (England and Wales Document J / Scotland - Part F), along with any local regulations and working practices that may apply.
SITE REQUIREMENTS Elegance 250 Elegance 280 Elegance 270 7
SITE REQUIREMENTS Additional information covering the installation of the Elegance stove may be found in the British Standard: BS8303. WALLS ADJACENT TO HEARTHS HEARTH DIMENSIONS The appliance must stand on a constructional hearth with the minimum dimensions as shown in diagram below. Solid, non combustable material e.
PRE-INSTALLATION CHECKS It is important that adequate ventilation exists and the flue or chimney system that is to be used is in good working condition. Products of combustion that enter the room could be a serious health risk. Before installation of this product we recommend that the flue or chimney system and ventilation requirements are inspected by a competent person, and passed as suitable for use with the appliance to be fitted. In particular the following should be checked: - 1.
PRE-INSTALLATION CHECKS 1.12 Where a hearth, fireplace, flue or chimney is provided or extended (including cases where a flue is provided as part of refurbishment work), information essential to the correct appliance and use of these should be permanently posted in the building, to meet Requirement J4 of the Building Regulations (England and Wales), F3.12 (Scotland). 2. ADDITIONAL VENTILATION 2.2 Extractor fans or cooker hoods should not be placed in the same room or space as the appliance. 2.
INSTALLATION INSTRUCTIONS Because each installation is unique to the property, it is not possible to give full details to suit every setting. However the installation should comply with the requirements of the Building Regulations and be made using ‘best practice’ construction methods. 1.6 Typical top flue installation. Flue to be installed in accordance with manufacture’s instructions.
INSTALLATION INSTRUCTIONS 2. COMMISSIONING 2.1 Before lighting the Elegance stove, check the following items: a) Fit of internal parts (firegrate, firebricks, baffles, and fuel retainer). b) Door alignment, seals and catch operation. 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 c) Operation of air controls. If there are any problems with the fit or operation of any of these items, this should be corrected before continuing with the commissioning of the Elegance stove.
OPERATING INSTRUCTIONS 1. GENERAL 2. USING THE STOVE FOR THE FIRST TIME 1.1 This stove is designed for domestic heating and should only be used for this purpose, and in accordance with the manufacturer’s operating instructions. 2.1 When new, it is best to burn the fire at a low output for the first few days of use. This will allow the construction to settle and all fixing glues and paint to fully cure. 1.
OPERATING INSTRUCTIONS OVER-FIRING 3.11 We would recommend that the stove be burnt at high output for at least 30 minutes each day when it is in use. This will help reduce the build-up of tars and creosotes within the stove and flue system. 4.12 Do not use the appliance at maximum output for prolonged periods of time, or over fill the firebox with fuel, as this could result in over-firing.
OPERATING INSTRUCTIONS 5.3 When burning wood the amount of ash will be smaller and may only need removal once every week. To do this, allow the fire to burn out and cool. Then after removing the log retainer scoop out the ash with a suitable shovel. It is best to leave a layer of ash in the stove to form a bed for the new fire. 5.4 Do not place ash in a bin made from plastic or any other combustible material. 6. RECOMMENDED FUELS 6.
MAINTENANCE AND SERVICING 4.6 Re-fit cleaned internal parts. 1. GENERAL CLEANING 1.1 We would recommend that your Elegance stove be cleaned fully on a regular basis, according to the level of use. Attention should be given to cleaning the baffle system, flueways and removing ash. Regular cleaning and preventive maintenance will help give many years of safe use. 4.7 Remove the glass from the door, and discard all old rope seals. 4.
SPARE PARTS LIST Elegance 200 Part No. Item 183793 183799 See detail list* 180492 183790 183963 181938 1 2 3 4 5 6 7 8 9 10 11 Description Stove body Door - anthracite Ash pan Wood storage compartment Flue spigot Firebrick Grate Part No.
SPARE PARTS LIST Elegance 210 Part No. Item 183793 183799 See detail list* 180492 0065000015000 183790 183963 181938 1 2 3 4 5 6 7 8 9 10 11 Description Stove body Door - anthracite Ash pan Wood storage compartment Flue spigot Firebrick Grate Warming compartment insert plate Log Guard Door Handle Primary air control 18 Part No.
SPARE PARTS LIST Elegance 220 Part No. Item 183793 183799 See detail list* 180492 183790 183963 181938 1 2 3 4 5 6 7 8 9 10 11 Description Part No.
SPARE PARTS LIST Elegance 240 Part No. Item 182554 181338 See detail list* 180492 181341 182556 181938 1 2 3 4 5 6 7 8 9 10 Description Part No.
SPARE PARTS LIST Elegance 250 Part No. Item 183761 181338 See detail list* 180492 183762 183763 183764 1 2 3 4 5 6 7 8 9 10 Description Stove body Door - anthracite Ash pan Wood storage compartment Flue spigot Firebrick Grate Warming compartment insert plate Log Guard Door Handle 21 Part No.
SPARE PARTS LIST Elegance 270 Part No. Item 183761 181338 See detail list* 180492 183762 183763 183764 181938 181984 1 2 3 4 5 6 7 8 9 10 11 12 Description Stove body Door - silver painted Ash pan Wood log compartment Flue spigot Firebrick Grate Warming shelf inlay (silver) Log Guard Door Handle Primary air control Glass pane 370x340 Part No.
SPARE PARTS LIST Elegance 280 Part No. Item 183953 183450 See detail list* 182641 180492 182654 181930 181938 181938 182655 181361 1 2 3 4 5 6 7 8 9 10 11 12 14 15 16 Description Part No.
YEOMAN STOVES A division of Stovax Ltd Falcon Road, Sowton Industrial Estate, Exeter, EX2 7LF Tel 01392 474500 Fax 01392 219932 www.yeoman-stoves.co.uk Email: yeoman@stovax.