Save This Manual for Future Reference Electric Log Splitter Operator’s Manual MODEL NUMBER YS0552 SERIAL NUMBER PURCHASE DATE Both model number and serial number may be found on the main label. You should record both of them in a safe place for future use.
Electric Log Splitter Your new YARDMAX™ electric log splitter offers quality construction, and is easy and safe to operate. With proper use and care, it is designed to give you many years of dependable service.
Electric Log Splitter Specifications Item No. 120V~ 60Hz 15A, 1.75HP Diameter Log Capacity 10 in Length 20.5 in Splitting Force 5 ton Hydraulic Pressure 3,000 PSI Hydraulic Oil Capacity Overall Size 3.7 qt Length 37.4 in Width 18.1 in Height 39.5 in Weight 108 lbs Symbols The rating plate on your machine may show symbols. These represent important information about the product or instructions on its use. Read these instructions carefully. Wear eye protection. Wear hearing protection.
Electric Log Splitter » Operator’s Manual ASSEMBLY CONTENTS SUPPLIED RECOMMENDED TOOLS Your YARDMAX log splitter comes partially assembled and contains the following: To assemble your YARDMAX log splitter, you will need a 6mm hex hand socket or allen wrench, 13mm wrench, and pliers. 1. L ine up the holes in the rear support legs with the holes in the gray support brackets and rear U-shaped connecting pipe.
Electric Log Splitter » Operator’s Manual KNOW YOUR MACHINE FEATURES AND CONTROLS 5. I nsert the log tray table and make sure the bolts hold the table. (See Figure 5) Log Ram Log Retaining Plates Work Table Control Lever Guard Motor Wedge Log Tray Table Control Box Switch Figure 5 WARNING! Make sure that the log splitter is switched off and that the pressure plate has returned to its starting position before attaching the collector table.
Electric Log Splitter MAX PRESSURE LIMITING SCREW LOAD A LOG Max pressure was preset at the factory by a qualified mechanic using professional tools. When loading a log, place hands on the sides of the log, not the ends. Make sure logs will not twist, rock, or slip while being split. Do not adjust the max pressure limiting screw! Unauthorized resetting will prevent the hydraulic pump from providing enough splitting pressure or RESULT IN SERIOUS INJURY AS WELL AS DAMAGE TO THE MACHINE.
Electric Log Splitter FREEING A JAMMED LOG Release both controls. » Operator’s Manual REPLACING HYDRAULIC OIL Disassemble the log tray table before replacing the hydraulic oil. fter the log ram moves back to its starting position and A completely stops, insert a wood wedge under the jammed log. Replace the hydraulic oil in your YARDMAX log splitter after every 150 hours of use. Follow these steps to replace it: Make sure all moving parts stop and the log splitter is unplugged.
Electric Log Splitter Cause 1. Log is improperly positioned. 2. T he sizes or hardness of the log exceeds the capacity of the machine. Fails to split logs. Log ram moves inconsistently, making unfamiliar noises or vibrations. 3. W edge cutting edge is dull. | Troubleshooting 2. Reduce the log sizes before splitting it on the log splitter. 5. A djustment was made on max pressure limiting screw. 4. Locate leak(s) and contact YARDMAX.
Electric Log Splitter » Operator’s Manual PARTS LIST No. No. 15 | Description QTY. No. Description Description QTY. No. Description QTY. QTY. 61 Gear Housing Plate 1 91 Waterproof Underlay 1 1 Lever Mount Nut 1 31 Frame Tube 1 62 Circlip 10 2 92 Motor Support Left Shoe 1 2 Cap Nut M10 3 32 Lead Plank 1 - Left 1 63 Gear Shaft 1 93 Motor Support Right Shoe 1 3 Lever 1 33 Lead Plank 2 - Right 1 64 Steel Ball 2.
Electric Log Splitter 17 | ??? » Operator’s Manual ??? | 18
yardmax.com Tame the Great Outdoors TM 1850 W Winchester Rd, Suite 106 | Libertyville, IL 60048 | 844-YARDMAX (844-927-3629) | info@yardmax.