Product Manual

16
prevent it from rotating when loosening the
bolts.
Anvil sharpening or adjustment
1. Loosen the bolts from under the anvil
bed. Use a 9/16 "Hex Wrench and
5mm Allen key.
2. Between the blade and the anvil,
you must leave a space of
approximately 3/32” (2.38mm). This
clearance is important to ensure best
chipping performance
3. Make sure that the bolts are
tightened.
Storage of your unit.
1. Care must be taken to prevent
oxidation on the surfaces. Cover all
equipment with a light coat of oil and use
an oil-soaked cloth for cleaning all
equipment. The cover the chipper with a
big plastic bag to prevent the
environmental conditions from harming the
equipment.
2. Follow the lubrication recommendations
engine for off-season storage.
3. Store equipment in a clean, dry area.
Never store the machine or fuel container
where there is an enclosed space, fire
presence, spark or pilot light such as water
heaters, furnaces, clothes dryers, etc..
What to to with the metal cage
package?
You may modify the box as storage
purposes, or you can cut it with a hand saw
into little pieces. These can disposed in local
garbage afterwards if needed.
CAUTION
Wear leather gloves to protect your
hands when cutting the corners.
Anvil
Have any more
questions?
Please cont
act us at:
www.yardbeast.com
(Customer Contact Form)
Or you may call us at:
[phone]
If you feel like writing us you may
do so at:
[e-mail]