Product Manual

18
To insert the battery pack
As shown in Fig.17
Align the battery pack with its compartment of the tool.
Push the battery pack into the hole until hear click sound.
It means the battery pack has been locked in position.
Turn the battery pack compartment cover to lock position.
Wall-mount holes
As shown in Fig.18
Fig. 18
The charger has hanging holes for convenient storage. Install screws in the wall 3.74
in. apart. Use screws sufficiently strong to hold the combined weight of the charger
and battery pack.
Before switching on and off
WARNING!
1) Wear suitable clothing, ears and eyes protecting when working with the equipment.
2) Ensure that the equipment is functional before each use.
3) Never use the equipment in potentially explosive areas under any circumstances.
4) The operating temperature must be between 41°F and 104°F.
5) Check the safe condition of the pressure washer:
– Check it for visual defects.
– Check that all parts of the pressure washer have been securely fitted.
– Check if the water connector and the high-pressure pipes are tight.
Y 4050PB indd 18 15-4-29 ��6 43