Product Manual

16
4. The green LED light of the charger will flash continuously during normal charging.
5. After charging is complete, You will hear a beep Sound again .the green LED on
the charger will be on and the four green lights of the battery pack will be on for 3-5
seconds then turn off.
If encounter one of following kind of situation, the light of Charger will turn red, and
flash, you will hear beep sound Per second until the problem has been corrected.
- Wrong communication. It refers to poor connection
between charger and battery pack .
- Internal temperature of the battery pack is out of range from 32°F to 122°F.
- Full voltage of the battery pack less than 32V
- short circuit of the output , or overload
The power indicator LED lights
This Li-Ion battery pack is equipped with a power indicator which is used to give
an indication of the battery pack’s remaining charge. Press the Power indicator
button to check battery charge as below. The LEDs will stay lit for approximately 4
seconds.
Meaning of power indicator:
Low capacity warning
Unlike other battery pack types, Lithium-Ion battery packs deliver fade-free power for
their entire run time. The tool will not experience a slow, gradual loss of power
as you work. If RED LED on the battery pack begins to flash, the battery pack’s
Y 4050PB indd 16 15-4-29 ��6 43