Instructions / Assembly

ManualsBrandsYARD FORCE ManualsLawn Mowers28-Volt 7 in. Robot Lawn Mower, Brushless Wheel Motors, CloudHawk App and Wifi Control, 1/3 Acre

10 11

Hotline: 1-866-902-9690 Hotline: 1-866-902-9690

PARTS LIST

1. STOP button

2. Ultrasonic sensor

3. Charging inlet

4. Rear wheel

5. Height adjustment dial

6. Control panel

7. Blade plate

8. Carry handle

9. Power switch button

SCOPE OF DELIVERY

INTENDED USE

The Robotic Mower is exclusively designed for mowing lawns. It is only intended for private use and is not

suitable for commercial use.

Any other use that is not specically approved in these instructions can result in damage to the Robotic

Mower and could be a serious danger to the user.

This appliance MUST NOT be used by children and persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

The owner or operator is responsible for accidents or harm to others people and their property.

The manufacturer cannot be held liable for damage caused by other incorrect operation of the Robotic

Mower or if it is not used in line with its intended purpose.

TECHNICAL SPECIFICATIONS

Model NX 100i

Max cutting area 1/3 Acre

Battery pack 28 V/ 2850 mAh

Switch power supply

Input: 100-120 VAC, 50/60 Hz, 56 W

Output: 32V

, 1.5 A

Power supply model* FY3201500S3

Mowing time on one charge 80 min

Rated voltage 28 V

Rated power 50 W

No load speed 3500 min

-1

Cutting width 7 in

Cutting height 1-1/3" - 3"

Charging time 90 min

Blade model 846210

Weight 18.7 lb

Frequency Band 0-148.5 kHz

Magnetic Field Strength 70 dBμA/m

Wifi Frequency Band 2400~2483.5MHz

Wifi Magnetic Field strength 20dBm

Max sound pressure level L

=53 dB, K=3 dB

Max sound power level L

=64 dB, K=3 dB

Degree of protection:

Robotic Mower IP24

Switching power supply IP67, Plug IP44

Spare parts

Spare Blades 9 Pcs

Boundary pegs 220 Pcs

Boundary wire 720'

Connectors 6 Pcs

* WARNING: For the purposes of recharging the battery, only use the detachable supply unit provided with

this appliance.

Original

instrcution

Robotic Mower

Wire pegs

Manuals

Spare blades

Extension cordDocking station

Connectors

Measurement ruler

Boundary wire

Switching Power Supply

Summary of content (5 pages)

PAGE 1
INTENDED USE PARTS LIST The Robotic Mower is exclusively designed for mowing lawns. It is only intended for private use and is not suitable for commercial use. Any other use that is not specifically approved in these instructions can result in damage to the Robotic Mower and could be a serious danger to the user.
PAGE 2
ASSEMBLY ASSEMBLY Stones Installation Guide This chapter explains how to install the Robotic Mower. Please read this completely before you start the installation. We recommend clearing the lawn of small (less than 4 in high) rocks and stones and any stones with a round or sloped edge. The Robotic Mower might try and climb such rocks instead of recognising them as a barrier. The Robotic Mower getting stuck on such a stone requires user intervention to restart mowing.
PAGE 3
ASSEMBLY ASSEMBLY If the driveway and lawn are at the same level, feel free to use the boundary wire to create a corridor. This allows your Robotic Mower to cross the driveway and reach the opposite lawn. If your lawn has a soft or uneven surface, we recommend fortifying the area around the docking station with a grass protection mesh. Otherwise, the repeated stress of the rear wheels can damage the turf.
PAGE 4
ASSEMBLY ASSEMBLY Flowerbeds Inventory and garage Use the boundary wire to exclude any flowerbeds from the cutting area. There are two options for the two lengths of boundary wire running between the flowerbed and the outer boundary: 1) Keep the distance between the parallel wires above 2 in. This way, the Robotic Mower will recognise the boundary wire as an ordinary obstacle. When cutting, it will "bounce" off it as usual.
PAGE 5
ASSEMBLY ASSEMBLY Press the buttons and then close the lid, a few seconds later, the Robotic Mower should automatically return to the docking station by locating and following the boundary wire in anti-clockwise direction. If Robotic Mower fails to dock correctly, move the docking station to a more suitable position. If your neighbour is using the same mower, you will need to keep a distance of 20 in between you and your neighbour's boundary wires to prevent the two devices interfering with each other.