User Guide

PERIODIC MAINTENANCE AND MINOR REPAIR
6-10
6
NOTE:
_
To install the quick fastener, push the
center pin out so that it will protrude
from the fastener head, insert the fas-
tener into the cowling, and then push
the protruding pin in until it is flush with
the fastener head.
_
EAU04555
Cowling B
To remove the cowling
Remove the bolts, loosen the quick fas-
tener screws 1/4 turn counterclock-
wise, and then take the cowling off.
To install the cowling
Place the cowling in the original posi-
tion, and then tighten the quick fastener
screws and install the bolts.
1. Quick fastener
After removal Before installation
1. Quick fastener screw (× 4)
2. Cowling B
3. Bolt
Right side
1. Bolt
2. Quick fastener screw (× 3)
3. Cowling B
Left side