User Guide

INSTRUMENT AND CONTROL FUNCTIONS
3-6
3
EAU04566
Multi-function display
The multi-function display is equipped
with the following:
●
a speedometer (which shows the
riding speed)
●
an odometer (which shows the to-
tal distance traveled)
●
two tripmeters (which show the
distance traveled since they were
last set to zero)
●
a fuel reserve tripmeter (which
shows the distance traveled since
the fuel level warning light came
on)
●
a clock
●
a self-diagnosis device
●
a display brightness and engine
speed indicator light control mode
NOTE:
_
●
Be sure to turn the key to “ON” be-
fore using the “SELECT” and
“RESET” buttons.
●
To switch the speedometer and
odometer/tripmeter displays be-
tween kilometers and miles, press
the “SELECT” button and
“RESET” button together for at
least two seconds.
_
Odometer and tripmeter modes
Pushing the “SELECT” button switches
the display between the odometer
mode “ODO” and the tripmeter modes
“TRIP 1” and “TRIP 2” in the following
order:
ODO
→
TRIP 1
→
TRIP 2
→
ODO
If the fuel level warning light comes on
(see page 3-2), the odometer display
will automatically change to the fuel re-
serve tripmeter mode “F-TRIP” and
start counting the distance traveled
from that point. In that case, pushing
the “SELECT” button switches the dis-
play between the various tripmeter and
odometer modes in the following order:
F-TRIP
→
TRIP 1
→
TRIP 2
→
ODO
→
F-TRIP
1. Multi-function display
2. “SELECT” button
3. “RESET” button