Service manual
7 - 74
CHAS
SWINGARM AND DRIVE CHAIN
4.Check:
• dust covers
• spacer
• oil seals
Damage/wear → Replace.
• bearings
Damage/pitting → Replace.
EB707410
CHECKING THE DRIVE CHAIN
1.Measure:
• ten-link section a of the drive chain
Out of specification → Replace the
drive chain.
NOTE:
• While measuring the ten-link section,
push down on the drive chain to
increase its tension.
• Measure the length between drive
chain roller 1 and A as shown.
• Perform this measurement at two or
three different places.
Max. ten-link drive chain sec-
tion
150.1 mm
2.Check:
• drive chain
Stiffness → Clean and lubricate or
replace.
3.Clean:
• drive chain
▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼
a. Wipe the drive chain with a clean
cloth.
b. Put the drive chain in kerosine and
remove any remaining dirt.