Service manual

7 - 28
CHAS
FRONT AND REAR BRAKES
EB702210
DISASSEMBLING THE FRONT BRAKE
MASTER CYLINDER
NOTE:
Before disassembling the front brake
master cylinder, drain the brake fluid
from the entire brake system.
1.Remove:
• union bolt 1
• copper washers 2
• brake hoses 3
NOTE:
To collect any remaining brake fluid,
place a container under the master cylin-
der and the end of the brake hose.
EB702220
DISASSEMBLING THE REAR BRAKE
MASTER CYLINDER
1.Remove:
• union bolt 1
• copper washers 2
• brake hose 3
NOTE:
To collect any remaining brake fluid,
place a container under the master cylin-
der and the end of the brake hose.
EB702243
CHECKING THE FRONT AND REAR BRAKE
MASTER CYLINDERS
The following procedure applies to both of
the brake master cylinders.
1.Check:
• brake master cylinder
Damage/scratches/wear → Replace.
• brake fluid delivery passages
(brake master cylinder body)
Obstruction → Blow out with com-
pressed air.
Å Front
ı Rear
Å
ı