User Guide
5 - 21
CHAS
FRONT BRAKE AND REAR BRAKE
2. Install:
● Brake lever 1
● Bolt (brake lever) 2
● Nut (brake lever) 3
NOTE:
Apply the lithium soap base grease on the
brake lever sliding surface, bolt and contacting
surface of the master cylinder piston.
Rear master cylinder
1. Install:
● Copper washer 1
● Brake hose 2
● Union bolt 3
WARNING
Always use new copper washers.
ACHTUNG:
CAUTION:
Install the brake hose so that its pipe por-
tion a directs as shown and lightly
touches the projection b on the master
cylinder.
T
R
.
.
6 Nm (0.6 m · kg, 4.3 ft · lb)
T
R
.
.
6 Nm (0.6 m · kg, 4.3 ft · lb)
New
T
R
.
.
30 Nm (3.0 m · kg, 22 ft · lb)
2. Install:
● Master cylinder 1
● Bolt (master cylinder) 2
3. Install:
● Spring 1
● Brake pedal 2
● O-ring 3
● Bolt (brake pedal) 4
● Clip 5
NOTE:
● Apply the lithium soap base grease on the
bolt, O-ring and brake pedal bracket.
● Install the clip with its stopper portion a fac-
ing inward.
T
R
.
.
11 Nm (1.1 m · kg, 8.0 ft · lb)
New
T
R
.
.
26 Nm (2.6 m · kg, 19 ft · lb)