User Guide

5 - 7
CHAS
FRONT WHEEL AND REAR WHEEL
9. Install:
● Hose cover 1
● Plain washer 2
● Bolt [hose cover (M8)] 3
● Bolt [hose cover (M6)] 4
T
R
.
.
16 Nm (1.6 m · kg, 11 ft · lb)
T
R
.
.
7 Nm (0.7 m · kg, 5.1 ft · lb)
Rear wheel
1. Install:
● Bearing (right) 1
● Circlip 2
● Spacer 3
● Bearing (left) 4
● Oil seal 5
NOTE:
● Apply the lithium soap base grease on the
bearing and oil seal lip when installing.
● Install the bearing with seal facing outward.
● Use a socket that matches the outside diam-
eter of the race of the bearing.
● Right side of bearing shall be installed first.
● Install the oil seal with its manufacture’s
marks or numbers facing outward.
ACHTUNG:
CAUTION:
Do not strike the inner race of the bearing.
Contact should be made only with the outer
race.
New
New
2. Install:
● Brake disc 1
● Bolt (brake disc) 2
NOTE:
Tighten the bolts in stage, using a crisscross
pattern.
T
R
.
.
14 Nm (1.4 m · kg, 10 ft · lb)