User Guide
4 - 74
ENG
KICK AXLE AND SHIFT SHAFT
EC4C5301
Shift shaft
1. Install:
● Roller 1
● Collar 2
● Torsion spring 3
● Shift shaft 4
NOTE:
Apply the engine oil on the roller and shift
shaft.
2. Install:
● Shift pedal 1
● Bolt (shift pedal)
NOTE:
When installing the shift pedal onto the shift shaft,
be sure that the center of the shift pedal is about
2 mm (0.08 in) a above the top of the footrest.
T
R
.
.
12 Nm (1.2 m · kg, 8.7 ft · lb)
Kick axle assembly
1. Install:
● Kick gear 1
● Plain washer 2
● Circlip 3
● Ratchet wheel 4
● Spring 5
● Plain washer 6
● Circlip 7
To kick axle 8.
NOTE:
● Apply the molybdenum disulfide oil on the
inner circumferences of the kick gear and
ratchet wheel.
● Align the punch mark a on the ratchet wheel
with the punch mark b on the kick axle.
New
New
2. Install:
● Torsion spring 1
To kick axle 2.
NOTE:
Make sure the stopper a of the torsion spring
fits into the hole b on the kick axle.