User Guide
4 - 50
ENG
CLUTCH
EC493000
REMOVAL POINTS
EC483211
Clutch boss
1. Remove:
● Nut 1
● Lock washer 2
● Clutch boss 3
NOTE:
Straighten the lock washer tab and use the
clutch holding tool 4 to hold the clutch boss.
Å For USA and CDN
ı Except for USA and CDN
Clutch holding tool:
YM-91042/90890-04086
Å
ı
EC494000
INSPECTION
EC484100
Clutch housing and boss
1. Inspect:
● Clutch housing 1
Cracks/wear/damage → Replace.
● Clutch boss 2
Scoring/wear/damage → Replace.
EC484201
Primary driven gear
1. Check:
● Circumferential play
Free play exists → Replace.
● Gear teeth a
Wear/damage → Replace.
EC484400
Clutch spring
1. Measure:
● Clutch spring free length a
Out of specification → Replace springs
as a set.
Clutch spring free length:
Standard <Limit>
50 mm (1.97 in) 49 mm (1.93 in)