Operation Manual

5 - 56
CHAS
SWINGARM
5. Install:
● Relay arm 1
● Bolt (relay arm) 2
● Plain washer 3
● Nut (relay arm) 4
To swingarm.
N
OTE:
● Apply the molybdenum disulfide grease on
the bolt.
● Do not tighten the nut yet.
6. Install:
● Swingarm 1
● Pivot shaft 2
N
OTE:
● Apply the molybdenum disulfide grease on
the pivot shaft.
● Insert the pivot shaft from right side.
T
R
.
.
85 Nm (8.5 m · kg, 61 ft · lb)
7. Check:
● Swingarm side play a
Free play exists → Replace thrust bear-
ing.
● Swingarm up and down movement b
Unsmooth movement/binding/rough
spots → Grease or replace bearings,
bushes and collars.
8. Install:
● Bolt (connecting rod) 1
● Plain washer 2
● Nut (connecting rod) 3
N
OTE:
● Apply the molybdenum disulfide grease on
the bolt.
● Do not tighten the nut yet.
9. Install:
● Bolt (rear shock absorber-relay arm) 1
● Nut (rear shock absorber-relay arm) 2
N
OTE:
Apply the molybdenum disulfide grease on the
bolt.
T
R
.
.
53 Nm (5.3 m · kg, 38 ft · lb)