Operation Manual

4 - 71
ENG
KICK AXLE AND SHIFT SHAFT
EC4B5111
Stopper lever
1. Install:
● Torsion spring 1
● Stopper lever 2
● Bolt (stopper lever) 3
N
OTE:
Align the stopper lever roller with the slot on
segment.
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
Shift guide and shift lever assembly
1. Install:
● Spring 1
● Pawl pin 2
● Pawl 3
To shift lever 4.
N
OTE:
Apply the engine oil on the springs, pawl pins
and pawls.
2. Install:
● Shift lever assembly 1
To shift guide 2.
2
1
3. Install:
● Shift lever assembly 1
● Shift guide 2
N
OTE:
● The shift lever assembly is installed at the
same time as the shift guide.
● Apply the engine oil on the bolt (segment)
shaft.