Service manual

5-37
SWINGARM
11. Tighten:
Nut (relay arm) "1"
12. Install:
Cap "1"
Install the right cap with its mark "a"
facing forward.
13. Install:
Bolt (lower chain tensioner) "1"
Washer "2"
•Collar "3"
Lower chain tensioner "4"
Nut (lower chain tensioner) "5"
14. Install:
Drive chain support "1"
Drive chain support cover "2"
Bolt {drive chain support [L = 50
mm (1.97 in)]} "3"
Nut (drive chain support) "4"
Bolt {drive chain support cover [L
= 10 mm (0.39 in)]} "5"
Nut (relay arm):
70 Nm (7.0 m•kg, 50
ft•lb)
Nut (lower chain tension-
er):
16 Nm (1.6 m•kg, 11
ft•lb)
Nut (drive chain sup-
port):
7 Nm (0.7 m•kg, 5.1
ft•lb)
Bolt (drive chain support
cover):
7 Nm (0.7 m•kg, 5.1
ft•lb)