Specifications

GENELEC
SUBWOOFERS
Analog and Digital Cabling
Special interconnect cable connects between
the XLR connectors of the two 2029A Digital
monitors. The IEC958 interface cable from
your digital audio source connects to one of
the 2029A Digital units. In the digital audio
reproduction mode the output level for both
speakers pair is controlled with the right
unit. The balance is automatically calibrated
correctly with the proposed output level set-
ting on the left unit.
Mounting Options
There are several possibilities for mounting
the 2029A/2029B. On the base of the moni-
tor is a 3/8˝ UNC threaded hole which can
accommodate a standard microphone stand.
There is a provision for an Omnimount size
50 bracket, for which two M6x10mm screws
are required.Alternatively the speakers can
be hung on M4 screws with suitable heads by
one of the three keyhole slots on the back-
panel. They can be hung in a horizontal or
vertical position. Friction pads are provided
for placement on a shelf or a stand.
STUDIO MONITORS
589
PHOTO - VIDEO - PRO AUDIO
ORDER & INFO. [phone] • FAX: [phone] [phone]
1-800-875-6951 • www.bhphotovideo.com
7050A 8˝ Active Dual-Input Subwoofer
The 7050A is a very compact subwoofer incorporating
all the amplifier and crossover electronics needed to
combine it with a Genelec 1029 or 2029 series speaker.
Adding the 7050A to a 1029/2929 system creates a
compact nearfield monitoring system capable of a flat
frequency response from 38 Hz to 20 kHz (± 2.5 dB).
2029A 2029B
Input Word 16 - 24 bits 16 - 24 bits
Length
Input Format IEC958, AES/EBU
S/P-DIF,
EIJAC CP-340
Digital Input RCA 75Ω XLR 110Ω
Input Sampling Rate
No De-emphasis 25 - 55 kHz 29 - 100 kHz
Using de-emphasis 44.1 and 48 kHz 44.1 kHz
SPL
Short term RMS 100 dB SPL 100 dB SPL
@1m
Peak per pair with 110 dB SPL 110 dB SPL
music material @ 1m @ 1m
Drivers
Bass 5˝ 5˝
Tr eb l e 3/4˝ metal dome + DCW
Crossover Freq. 3.3 kHz 3.3 kHz
Free Field Freq.
Response ± 2.5 dB 70 - 18k Hz 70 - 18k Hz
Amplifier power /ch
Bass 40 W 40 W
Tr eb l e 40 W 40 W
Dimensions 9
3
⁄4
x 5
15
⁄16
x 7
1
⁄2
˝9
3
⁄4
x 5
15
⁄16
x 7
1
⁄2
˝
(H x W x D)
We i gh t 13.2 lb. 13.2 lb.
7060A/7070A 10˝ and 12˝ Active Multi-Channel Subwoofers
The 7060A and 7070A are powerful and precise bass monitoring tools for today’s
5.1 or 6.1-channel surround sound or traditional stereo systems. With their 19Hz
(7070A) or 29Hz (7060A) lower cutoff frequency, high sound pressure output
capability and versatile bass management systems, they can be adapted to all low
frequency monitoring situations.
◆ The built-in bass management unit has six
signal input and output channels (L/C/R
Front and L/C/R Rear),LFE input and
summed signal output connectors,provid-
ing great flexibility and easy connection.
◆ The discrete LFE signal input is equipped
with a selectable 85/120 Hz low-pass filter
and a 0/+10 dB LFE sensitivity switch.
◆ Adjustable sensitivity, bass roll-off and
phase matching controls let you tailor the
response of the subs to the environment.
◆ Laminar Spiral Enclosure (LSE ) cabinet
construction ensures reliability
◆ Integrated 85 Hz test tone generator for
accurate crossover phase alignment.
◆ Summed, balanced inputs on two XLR
connectors
◆ Sensitivity can be attenuated by from 0dB
to -18 dB for easy level matching with
the main speakers for varying positions.
◆ Produces 70 W of output power, with
very low THD and IM distortion.
◆ 8˝ magnetically shielded long throw cone
driver is capable of producing SPLs up to
105 dB in half space.
◆ To make the system immune to overloads
and spurious signals, the circuitry includes
driver overload protection and power-on
signal muting. Also incorporates thermal
overload and short circuit protection.
◆ Like the larger 7000 series subwoofers, the
7050A features Genelec’s Laminar Spiral
Enclosure (LSE ) cabinet construction
resulting in a robust and reliable system.
The handsome cast-aluminum grille pro-
tects the magnetically shielded 8˝ driver.
7050A 7060A 7070A
SPL (Short Term RMS @1m) 100dB SPL 108dB SPL 112dB SPL
Input Channels 2 (for stereo only) 6 6
Sum Out Outputs 011
Driver 8˝ 10˝ 12˝
Bass Level 0...-18 dB (variable) +12 to -6 dB (variable) +12 to -6 dB (variable)
Bass Roll-Off n/a 0 to -6 dB (2 dB/step) 0 to -6 dB (2 dB/step)
Phase Adjustment n/a 0 to 270° (90 °/step) @85 Hz
Frequency Response 38 Hz - 85 Hz ±3 dB 29 Hz - 85 Hz 19 - 85 (120) Hz ±3 dB
Amplifier Power (1-ch.) 70 W 120 W 250 W
Dimensions (HWD) 410 x 350 x 314 mm 527 x 462 x 360 mm 625 x 555 x 490 mm
We i ght 33 lb. 57 lb. 110 lb.