Owner's Manual
Table Of Contents
AUTOMATIC POWER-SWITCHING FUNCTION
This function automatically switches the unit between standby and power-on modes.
The subwoofer automatically places itself in standby mode
if
it does not receive an input signal for 7 or 8 minutes. (The
power indicator lights red.)
When the subwoofer detects a bass signal input
of
below 200 Hz, it automatically places itself in power-on mode. (The
power indicator lights green.)
1 Set the subwoofer to standby.
2 Change the AUTO STANDBY setting.
- LOW: Normally select this position to activate this function.
- HIGH:
If
this function does not operate with AUTO STANDBY switch set
to
LOW, select this position so that the
subwoofer detects input signals with a lower level and switches the power on automatically.
- OFF: Select this position to deactivate this function, for example, when the subwoofer switches the power on
unexpectedly by sensing noises from other appliances.
Notes:
• This function does not operate when the POWER switch is set to the OFF position, or when you manually set the
subwoofer to standby mode by pressing the STANDBY/ON button.
• Noise received from other appliances may extend the time period before the subwoofer places itselfin standby mode to
more than 8 minutes.
11