Owner`s manual

USING SET MENU
25
SETUP
English
The following diagram illustrates the overall flow of the setup procedure.
The flow chart of SET MENU
Run AUTO SETUP.
See “AUTO SETUP” on page 26.
Look for a remedy.
See “Error messages for AUTO SETUP” on page 33 for a complete list of error
messages and possible remedies.
Run BASIC SETUP.
See “BASIC SETUP” on page 57.
Play back audio signals or adjust the settings for the beam mode and the cinema DSP.
See “PLAYBACK” on page 37.
Run MANUAL SETUP.
See “MANUAL SETUP” on page 63.
y
• If you cannot clearly hear a sound beam from a specific speaker channel, adjust settings for
SETTING PARAMETERS (see page 65) or for BEAM ADJUSTMENT (see page 66) in
BEAM MENU.
• If there are acoustically absorbent objects such as curtains in the path of the sound beams,
adjust settings for TREBLE GAIN in BEAM MENU (see page 68).
If an error occurs
If the problem persists
If you want to make additional settings
and adjustments