Owner's Manual

60 En
SETTINGS
Setup menu
A variety of settings for this unit can be specified and adjusted
from the setup menu. Among the options available are the sound
beam output method for optimal surround sound effects, speaker
volume control, and HDMI settings.
• The setup menu is displayed on, and operated from, the TV
screen (it cannot be displayed in the front panel display). See
“Displaying the menu screen on the TV” (☞p. 21) for
instructions on displaying the setup menu on the TV.
/
SETUP
RETURN
ENTER
Setting the setup menu
1
Press the SETUP key.
1)
2
Press the S/T key to select a menu and
then press the X key.
2)
Repeat these steps to display the desired menu.
3
Press the S/T key to change the setting
value of each menu.
3)
4
Press the SETUP key again to exit the
setup menu.
Press the W key
4)
to return to the previous menu.
SETUP MENU
BEAM
SOUND
HDMI
AirWired
DISPLAY
INFORMATION
IntelliBeam
HORIZONTAL ANGLE
BEAM TRAVEL LENGTH
FOCAL LENGTH
IMAGE LOCATION
CHANNEL OUT
IntelliBeam
HORIZONTAL ANGLE
BEAM TRAVEL LENGTH
FOCAL LENGTH
IMAGE LOCATION
CHANNEL OUT
SETUP MENU
BEAM
SOUND
HDMI
AirWired
DISPLAY
INFORMATION
Hold down the SETUP key to display “OSD LANGUAGE” directly on
the screen (☞p. 22, 67).
The ENTER key performs the same function as the X key.
The default settings are marked with “*”.
The RETURN key performs the same function as the W key.
1) Note
2)
y
3) y
4) y