User Manual

SPMK20 INSTALLATION GUIDE

Please see the pictures below outlining the steps for installation of the SPMK20 wall bracket. If you have any

questions, please call Yamaha’s (Australia) help desk on 1300 739 411.

Please note, the size of the HDMI lead is important. NOT ALL HDMI leads will t. Refer below for images of the leads

required and their dimensions.

Install the SPMK20 bracket to the

wall using included xings.

Use exible, thin HDMI cables

and/or 90-degree adaptors.

Cable shown from underneath

SPMK20 bracket.

Connect HDMI cables to correct

inputs/outputs on the Sound Bar.

Depth of HDMI plug should not

exceed 25 mm (refer picture).

Back plate of bracket sits 20 mm

from wall.

Run cables. In this example, cables

are run through a wall plate.

Place the Sound Bar on the

SPMK20 bracket and fasten it.

The Sound Bar installation is now

complete.