Manual

You can adjust the sound beam output level of each channel by using the test tone or the audio output being played back
in each beam mode to achieve a more true-to-life surround sound experience.
You can use the test tone feature to output a test tone from
each channel to manually balance the channel levels.
Use this to set the channel levels so that the volume level
of each channel is identical when heard from your
listening position.
[$
3
Press A / _ to select the channel you want
to adjust.
The front panel display changes as follows:
•-_ TEST FRONT L
t
TEL-.T CEIlTER
TEST FRONT R
TEST 5L/R. R
TEST 5UR. L
•"-* TEST __.UBtlOOFER
1 Set the operation mode selector to YSP.
2
Press TEST.
"TEST FRONT L" appears in the front panel display
and a test tone is output from the front left channel.
TEST
#
"TEST SUBWOOFER" is only available when a subwoofer
is connected to this unit and SUBWOOFER is selected for
BASS OUT in SOUND MENU (see page 80).
Press <_/ _ to adjust the channel volume.
Control range: -10.0 dB to +10.0 dB
TEST FRONT L =
87 En