Manual

ImV_,v,,llv_.v_-1.-Iiq-
BEAM TRAVEL LENGTH (Beam travel length)
A certain amount of delay must be applied to the sound
from each channel so that all sounds can arrive at the
listening position at the same time. This menu sets the
distance that sound beams travel after being output and
reflected off the wall until they arrive at the listening
position and adjusts the delay applied to the respective
channel.
The lines in the illustration below indicate the distance.
I t I
Choices: 0.3 m to 24.0 m (1.0 ft to 80.0 ft)
• Front L adjusts the distance the front left channel
sound beams travel.
• Front R adjusts the distance the front right channel
sound beams travel.
• Center adjusts the distance the center channel sound
beams travel.
• Surround L adjuststhe distance the surround left
channel sound beams travel.
• Surround R adjusts the distance the surround right
channel sound beams travel.
b)EEQMTRAUELLENGTH
5 beam
->Front.L.......6.Om
Front R ....... 6. Om
Center ........ 2.5m
Surround L .... 9, Im
Surround R .... 9. im
[_]/[T] : UP/Doun [_]/[i_] : Sel
[ENTER] : Return
We recommend that you use the setting optimizedby AUTO
SETUP (see page29). Adjustthis parameteronly whenyou
changed HORIZONTALANGLE (see page 77).
FOCAL LENGTH (Focal length)
Use to set the distance from the front of this unit to the
focal point of output for each channel to achieve an
expansive feeling for each channel.
The focal points except for the center channel should be
set near the reflection points on the walls. The shorter the
distance, the larger the expansion.
I
Front left channel
Center channel
Choices: -1.0 m to +13.0 m (-3.5 ft to +43.5 ft)
Adjust toward - (minus) to move the focus outward and
adjust toward + (plus) to move the focus toward the
normal position.
• Front L adjusts the focal length for the front left sound
beams.
• Front R adjusts the focal length for the front right
sound beams.
• Center adjusts the focal length for the center sound
beams. Initial setting: -0.5 m (-1.5 ft)
• Surround L adjusts the focal length for the surround
left sound beams.
• Surround R adjusts the focal length for the surround
right sound beams.
We recommendthat you usethe initial setting(-0.5 m(or 1.5 ft))
for the center channel.
c>FOC&LENGTH
5 beam
÷ Front L ...... +l.Sm
Front R...... +l,Sm
Center ........ 0,5m
Surround L.,.+2,3m
Surround R...+2.3m
[i]/[_]:Ue.xDoun [4],"[*]:Sel
[ENTER]:Return
78 En