Owner's Manual

85 En
Adjusting the audio balance
ADVANCED
OPERATION
English
5 Press TEST when you have completed all
your adjustments.
• All channel levels cannot be adjusted when the 2-channel or 5-
channel stereo playback (see page 60), My Beam (see page 61),
or My Surround (see page 55) is selected as the beam mode.
• “FRONT L/R” cannot be adjusted when Stereo plus 3 Beam is
selected as the beam mode (see page 55).
• “FRONT L/R” are automatically adjusted depending on the
settings of the other channels when Stereo plus 3 Beam or
stereo playback is selected as the beam mode (see pages 55 and
60).
y
If the level of a particular channel cannot be adjusted, “– –dB”
appears in the front panel display.
You can also manually adjust the channel levels while
playing back an input source such as a DVD.
1 Set the operation mode selector to YSP.
2 Press CH LEVEL repeatedly (or press
CH LEVEL and / ) to select the channel
you want to adjust.
The front panel display changes as follows.
“SWFR” is available only when a subwoofer is connected to
this unit and SWFR is selected for BASS OUT in SOUND
MENU (see page 78).
Notes
Using the audio output being
played back
TEST
ENHANCER MENU
RETURNDISPLAY
TV VOL
VOLUME
MUTE
CH LEVEL TEST
TV INPUT TV MUTE
ENTER
CODE SET
CH
ENTRY
CAT/
A-E
YSP
TV/AV
(U.S.A. and Canada models)
Note
YSP
TV/AV
CH LEVEL
ENTER
CH LEVEL
FRONT L +1.0dB
CENTER -2.5dB
FRONT R +1.0dB
SUR.R +2.0dB
SUR.L +2.0dB
SWFR --dB
or