Operation Manual

52 En
FM tuning
You can tune into the preset stations simply by selecting
the preset station groups and numbers.
1 Set the operation mode selector to TV/AV.
2 Press FM to select FM as the input source.
“FM” appears in the front panel display.
y
You can also press INPUT on the front panel repeatedly to
select FM as the input source.
If “XM” appears in the front panel display, press FM/XM
again to display “FM” (U.S.A. and Canada models only).
3 Press A-E ( / ) to select the desired
preset station group (A to E).
The preset station group letter appears in the front
panel display and changes each time you press the
button.
y
If the colon (:) does not appear, press PRESET/TUNE to
display the colon.
U.S.A. and Canada models use CAT/A-E .
Even when the operation mode selector is set to YSP, you
can select the desired preset group by pressing A-E (CAT
for U.S.A. and Canada models).
4 Press ENTRY ( / ) to select the desired
preset station number (1 to 8).
The preset station group and number appear in the
front panel display together with the station band and
frequency.
y
You can also use the numeric buttons to select the desired
preset station number.
Even when the operation mode selector is set to YSP, you
can select the desired preset number by pressing / .
Radio Data System is a data transmission system used by
FM stations. You can display the four types of the Radio
Data System information: PS (program service), PTY
(program type), RT (radio text), and CT (clock time). The
corresponding indicators light up in the front panel
display.
You can select the Radio Data System display modes only when
the corresponding Radio Data System indicators are lit in the
front panel display. It may take a while for this unit to receive
all of the Radio Data System data from the station.
If the signals being received are not strong enough, this unit
may not be able to utilize the Radio Data System data. In
particular, the “RT” mode requires a large amount of data and
may not be available even when the other Radio Data System
display modes are available.
In case of poor reception conditions, tune into the desired
station manually (see page 49).
In case the signal strength is weakened by external interference
while this unit is receiving the Radio Data System data, the
reception may be cut off unexpectedly and “...WAIT” appears in
the front panel display.
If the reception is cut off when the “CT” mode is selected, “CT
WAIT” appears in the front panel display.
Selecting a preset station
YSP
TV/AV
FM
ENTER
A-E
Displaying the Radio Data System
information (Europe model only)
Notes
ENTER
ENTRY
A1:FM 88.9 MHz