Operation Manual

27 En
Connections
PREPARATION
English
If your component supports optical digital connections, connect the optical digital output jack on your component
(e.g., DVD player/recorder) to the AUX 1 OPTICAL DIGITAL INPUT jack on this unit. If your component does not
support optical digital connections, connect the coaxial digital output jack on your component to the AUX 2 COAXIAL
DIGITAL INPUT jack on this unit.
If your component does not support any digital connections, connect the analog audio output jacks on your component
(e.g., VCR) to the AUX 1 AUDIO INPUT jacks on this unit.
y
To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 20).
If you make analog and digital audio connections at the same time as shown in the illustration below, the digital audio signals input at
the AUX 1 OPTICAL DIGITAL INPUT or AUX 2 COAXIAL DIGITAL INPUT jack take priority over the analog audio signals input
at the AUX 1 AUDIO INPUT jacks.
Audio pin cable
Optical cable
Digital audio pin cable
Connecting other external components
Note
DIGITAL INPUTOUT
TV/STB
DVD
SUBWOOFER IR INXM TV/STB AUX 1 AUX 1
AUX 2
COAXIAL
OPTICAL
VIDEO
DOCK
AUDIO INPUTANTENNA
Optical
digital
output
Video signal to the TV
DVD player/recorder, VCR,
game console, CD player, etc.
Rear panel of this unit
(U.S.A. and Canada models)
Analog
audio
output
LR
Coaxial
digital
output
Audio