manual

SETTINGS ➤ Setup menu En 48
SETTINGS
A variety of settings for this unit can be specified and adjusted from the setup menu. Among the options available are channel volume control,
HDMI settings, and network settings.
The setup menu is displayed on, and operated from, the TV screen. See “Displaying the menu screen on the TV” (p. 18) for instructions on
displaying the setup menu on the TV.
Setting the setup menu
1
Press the SETUP key.
To display the Network or Bluetooth menu, press the
SETUP key again.
• Hold down the SETUP key for more than 3 seconds to display “OSD
Language” directly on the screen (p. 19, 52).
• If an update for the unit’s firmware is available, an envelope icon ( ) will be
displayed in the setup menu (p. 59).
2
Use the S/T key to select a menu and then press
the ENTER key.
Repeat these steps to display the desired menu.
The X key can be used in place of the ENTER key.
Press the W key or RETURN key to return to the previous
menu.
3
Use the S/T key to change the setting value of each
menu.
4
Press the SETUP key again to exit the setup menu.
Setup menu
Setup Menu
Sound
HDMI
Function
Information
Channel Level
Dynamic Range
Audio Delay
Setup menu
Setup Menu
Sound
HDMI
Function
Information
Channel Level
Dynamic Range
Audio Delay
SETUP
RETURN
 / 
 / 
ENTER